linux/arch/arm/mach-omap2/io.c

575 lines
12 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-omap2/io.c
*
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
* Copyright (C) 2007-2009 Texas Instruments
*
* Author:
* Juha Yrjola <juha.yrjola@nokia.com>
* Syed Khasim <x0khasim@ti.com>
*
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include <plat/serial.h>
#include <plat/omap-pm.h>
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
ARM: OMAP: add includes for missing prototypes Several C files in arch/arm/mach-omap* and arch/arm/plat-omap declare functions that are used by other files, but don't include the header file where the prototype is declared. This results in the following warnings from sparse: arch/arm/mach-omap2/irq.c:114:5: warning: symbol 'omap_irq_pending' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:186:13: warning: symbol 'omap2_init_irq' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:191:13: warning: symbol 'omap3_init_irq' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:196:13: warning: symbol 'ti81xx_init_irq' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:233:39: warning: symbol 'omap2_intc_handle_irq' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:242:6: warning: symbol 'omap_intc_save_context' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:265:6: warning: symbol 'omap_intc_restore_context' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:291:6: warning: symbol 'omap3_intc_suspend' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:297:6: warning: symbol 'omap3_intc_prepare_idle' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:306:6: warning: symbol 'omap3_intc_resume_idle' was not declared. Should it be static? arch/arm/mach-omap2/irq.c:312:39: warning: symbol 'omap3_intc_handle_irq' was not declared. Should it be static? arch/arm/mach-omap2/omap-secure.c:59:12: warning: symbol 'omap_secure_ram_reserve_memblock' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-display.c:133:13: warning: symbol 'zoom_display_init' was not declared. Should it be static? arch/arm/plat-omap/common.c:73:13: warning: symbol 'omap_init_consistent_dma_size' was not declared. Should it be static? arch/arm/mach-omap1/irq.c:61:5: warning: symbol 'omap_irq_flags' was not declared. Should it be static? arch/arm/mach-omap1/irq.c:179:13: warning: symbol 'omap1_init_irq' was not declared. Should it be static? arch/arm/mach-omap1/reset.c:11:6: warning: symbol 'omap1_restart' was not declared. Should it be static? Fix by including the appropriate header files. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Senthilvadivu Guruswamy <svadivu@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-04-13 12:34:26 +00:00
#include <plat/dma.h>
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-31 17:59:07 +00:00
#include "soc.h"
#include "iomap.h"
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include "common.h"
#include "clock.h"
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
.pfn = __phys_to_pfn(L3_24XX_PHYS),
.length = L3_24XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_24XX_VIRT,
.pfn = __phys_to_pfn(L4_24XX_PHYS),
.length = L4_24XX_SIZE,
.type = MT_DEVICE
},
};
#ifdef CONFIG_SOC_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
.virtual = DSP_MEM_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
.length = DSP_MEM_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_IPI_2420_VIRT,
.pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
.length = DSP_IPI_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_MMU_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
.length = DSP_MMU_2420_SIZE,
.type = MT_DEVICE
},
};
#endif
#ifdef CONFIG_SOC_OMAP2430
static struct map_desc omap243x_io_desc[] __initdata = {
{
.virtual = L4_WK_243X_VIRT,
.pfn = __phys_to_pfn(L4_WK_243X_PHYS),
.length = L4_WK_243X_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
.length = OMAP243X_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
.length = OMAP243X_SDRC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
.length = OMAP243X_SMS_SIZE,
.type = MT_DEVICE
},
};
#endif
#endif
#ifdef CONFIG_ARCH_OMAP3
static struct map_desc omap34xx_io_desc[] __initdata = {
{
.virtual = L3_34XX_VIRT,
.pfn = __phys_to_pfn(L3_34XX_PHYS),
.length = L3_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP34XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
.length = OMAP34XX_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
.length = OMAP343X_SMS_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
.length = OMAP343X_SDRC_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_PER_34XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
.length = L4_PER_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_EMU_34XX_VIRT,
.pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
#if defined(CONFIG_DEBUG_LL) && \
(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
{
.virtual = ZOOM_UART_VIRT,
.pfn = __phys_to_pfn(ZOOM_UART_BASE),
.length = SZ_1M,
.type = MT_DEVICE
},
#endif
};
#endif
#ifdef CONFIG_SOC_TI81XX
static struct map_desc omapti81xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
}
};
#endif
#ifdef CONFIG_SOC_AM33XX
static struct map_desc omapam33xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_WK_AM33XX_VIRT,
.pfn = __phys_to_pfn(L4_WK_AM33XX_PHYS),
.length = L4_WK_AM33XX_SIZE,
.type = MT_DEVICE
}
};
#endif
#ifdef CONFIG_ARCH_OMAP4
static struct map_desc omap44xx_io_desc[] __initdata = {
{
.virtual = L3_44XX_VIRT,
.pfn = __phys_to_pfn(L3_44XX_PHYS),
.length = L3_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_44XX_VIRT,
.pfn = __phys_to_pfn(L4_44XX_PHYS),
.length = L4_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER_44XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
.length = L4_PER_44XX_SIZE,
.type = MT_DEVICE,
},
ARM: OMAP4: Fix errata i688 with MPU interconnect barriers. On OMAP4 SOC, intecronnects has many write buffers in the async bridges and they need to be drained before CPU enters into standby state. Patch 'OMAP4: PM: Add CPUX OFF mode support' added CPU PM support but OMAP errata i688 (Async Bridge Corruption) needs to be taken care to avoid issues like system freeze, CPU deadlocks, random crashes with register accesses, synchronisation loss on initiators operating on both interconnect port simultaneously. As per the errata, if a data is stalled inside asynchronous bridge because of back pressure, it may be accepted multiple times, creating pointer misalignment that will corrupt next transfers on that data path until next reset of the system (No recovery procedure once the issue is hit, the path remains consistently broken). Async bridge can be found on path between MPU to EMIF and MPU to L3 interconnect. This situation can happen only when the idle is initiated by a Master Request Disconnection (which is trigged by software when executing WFI on CPU). The work-around for this errata needs all the initiators connected through async bridge must ensure that data path is properly drained before issuing WFI. This condition will be met if one Strongly ordered access is performed to the target right before executing the WFI. In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. IO barrier ensure that there is no synchronisation loss on initiators operating on both interconnect port simultaneously. Thanks to Russell for a tip to conver assembly function to C fuction there by reducing 40 odd lines of code from the patch. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Vishwanath BS <vishwanath.bs@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-26 01:04:31 +00:00
#ifdef CONFIG_OMAP4_ERRATA_I688
{
.virtual = OMAP4_SRAM_VA,
.pfn = __phys_to_pfn(OMAP4_SRAM_PA),
.length = PAGE_SIZE,
.type = MT_MEMORY_SO,
},
#endif
};
#endif
#ifdef CONFIG_SOC_OMAP5
static struct map_desc omap54xx_io_desc[] __initdata = {
{
.virtual = L3_54XX_VIRT,
.pfn = __phys_to_pfn(L3_54XX_PHYS),
.length = L3_54XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_54XX_VIRT,
.pfn = __phys_to_pfn(L4_54XX_PHYS),
.length = L4_54XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_WK_54XX_VIRT,
.pfn = __phys_to_pfn(L4_WK_54XX_PHYS),
.length = L4_WK_54XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER_54XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_54XX_PHYS),
.length = L4_PER_54XX_SIZE,
.type = MT_DEVICE,
},
};
#endif
#ifdef CONFIG_SOC_OMAP2420
void __init omap242x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
}
#endif
#ifdef CONFIG_SOC_OMAP2430
void __init omap243x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP3
void __init omap34xx_map_common_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
}
#endif
#ifdef CONFIG_SOC_TI81XX
void __init omapti81xx_map_common_io(void)
{
iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
}
#endif
#ifdef CONFIG_SOC_AM33XX
void __init omapam33xx_map_common_io(void)
{
iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP4
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
omap_barriers_init();
}
#endif
#ifdef CONFIG_SOC_OMAP5
void __init omap5_map_common_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
}
#endif
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
*
* Sets the CORE DPLL3 M2 divider to the same value that it's at
* currently. This has the effect of setting the SDRC SDRAM AC timing
* registers to the values currently defined by the kernel. Currently
* only defined for OMAP3; will return 0 if called on OMAP2. Returns
* -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
* or passes along the return value of clk_set_rate().
*/
static int __init _omap2_init_reprogram_sdrc(void)
{
struct clk *dpll3_m2_ck;
int v = -EINVAL;
long rate;
if (!cpu_is_omap34xx())
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
pr_info("Reprogramming SDRC clock to %ld Hz\n", rate);
v = clk_set_rate(dpll3_m2_ck, rate);
if (v)
pr_err("dpll3_m2_clk rate change failed: %d\n", v);
clk_put(dpll3_m2_ck);
return v;
}
static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
{
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
static void __init omap_common_init_early(void)
{
omap_init_consistent_dma_size();
}
static void __init omap_hwmod_init_postsetup(void)
{
u8 postsetup_state;
/* Set the default postsetup state for all hwmods */
#ifdef CONFIG_PM_RUNTIME
postsetup_state = _HWMOD_STATE_IDLE;
#else
postsetup_state = _HWMOD_STATE_ENABLED;
#endif
omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
omap_pm_if_early_init();
}
#ifdef CONFIG_SOC_OMAP2420
void __init omap2420_init_early(void)
{
omap2_set_globals_242x();
omap2xxx_check_revision();
omap_common_init_early();
omap2xxx_voltagedomains_init();
omap242x_powerdomains_init();
omap242x_clockdomains_init();
omap2420_hwmod_init();
omap_hwmod_init_postsetup();
omap2420_clk_init();
}
void __init omap2420_init_late(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
omap2_pm_init();
}
#endif
#ifdef CONFIG_SOC_OMAP2430
void __init omap2430_init_early(void)
{
omap2_set_globals_243x();
omap2xxx_check_revision();
omap_common_init_early();
omap2xxx_voltagedomains_init();
omap243x_powerdomains_init();
omap243x_clockdomains_init();
omap2430_hwmod_init();
omap_hwmod_init_postsetup();
omap2430_clk_init();
}
void __init omap2430_init_late(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
omap2_pm_init();
}
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 16:14:10 +00:00
#endif
/*
* Currently only board-omap3beagle.c should call this because of the
* same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
*/
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 16:14:10 +00:00
#ifdef CONFIG_ARCH_OMAP3
void __init omap3_init_early(void)
{
omap2_set_globals_3xxx();
omap3xxx_check_revision();
omap3xxx_check_features();
omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
omap3xxx_clk_init();
}
void __init omap3430_init_early(void)
{
omap3_init_early();
}
void __init omap35xx_init_early(void)
{
omap3_init_early();
}
void __init omap3630_init_early(void)
{
omap3_init_early();
}
void __init am35xx_init_early(void)
{
omap3_init_early();
}
void __init ti81xx_init_early(void)
{
omap2_set_globals_ti81xx();
omap3xxx_check_revision();
ti81xx_check_features();
omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
omap3xxx_clk_init();
}
void __init omap3_init_late(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
}
void __init omap3430_init_late(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
}
void __init omap35xx_init_late(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
}
void __init omap3630_init_late(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
}
void __init am35xx_init_late(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
}
void __init ti81xx_init_late(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
}
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 16:14:10 +00:00
#endif
#ifdef CONFIG_SOC_AM33XX
void __init am33xx_init_early(void)
{
omap2_set_globals_am33xx();
omap3xxx_check_revision();
ti81xx_check_features();
omap_common_init_early();
am33xx_voltagedomains_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_hwmod_init_postsetup();
am33xx_clk_init();
}
#endif
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 16:14:10 +00:00
#ifdef CONFIG_ARCH_OMAP4
void __init omap4430_init_early(void)
{
omap2_set_globals_443x();
omap4xxx_check_revision();
omap4xxx_check_features();
omap_common_init_early();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
omap_hwmod_init_postsetup();
omap4xxx_clk_init();
}
void __init omap4430_init_late(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
omap4_pm_init();
}
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 16:14:10 +00:00
#endif
#ifdef CONFIG_SOC_OMAP5
void __init omap5_init_early(void)
{
omap2_set_globals_5xxx();
omap5xxx_check_revision();
omap_common_init_early();
}
#endif
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
omap_sram_init();
if (cpu_is_omap24xx() || omap3_has_sdrc()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
}