q3k/linux
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux/drivers/mtd/nand/Kconfig

611 lines
19 KiB
Text
Raw Normal View History

mtd: nand: split out ECC module This way drivers could use ecc routines without depedency on whole nand Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-19 15:22:54 +00:00
config MTD_NAND_ECC
tristate
config MTD_NAND_ECC_SMC
bool "NAND ECC Smart Media byte order"
depends on MTD_NAND_ECC
default n
help
Software ECC according to the Smart Media Specification.
The original Linux implementation had byte 0 and 1 swapped.
mtd: Fix NAND submenu Move MTD_NAND_ECC and MTD_NAND_ECC_SMC above NAND memuconfig, to unbreak display in xconfig. This shouldn't change any dependencies. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-02 15:22:48 +00:00
menuconfig MTD_NAND
tristate "NAND Device Support"
depends on MTD
select MTD_NAND_IDS
select MTD_NAND_ECC
help
This enables support for accessing all type of NAND flash
devices. For further information see
<http://www.linux-mtd.infradead.org/doc/nand.html>.
Use menuconfig objects: MTD Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 21:21:41 +00:00
if MTD_NAND
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_VERIFY_WRITE
bool "Verify NAND page writes"
help
This adds an extra check when data is written to the flash. The
NAND flash device internally checks only bits transitioning
from 1 to 0. There is a rare possibility that even though the
device thinks the write was successful, a bit could have been
Fix several typos in drivers/ Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 20:31:37 +00:00
flipped accidentally due to device wear or something else.
mtd: nand: add software BCH ECC support This patch adds software BCH ECC support to mtd, in order to handle recent NAND device ecc requirements (4 bits or more). It does so by adding a new ecc mode (NAND_ECC_SOFT_BCH) for use by board drivers, and a new Kconfig option to enable BCH support. It relies on the generic BCH library introduced in a previous patch. When a board driver uses mode NAND_ECC_SOFT_BCH, it should also set fields chip->ecc.size and chip->ecc.bytes to select BCH ecc data size and required error correction capability. See nand_bch_init() documentation for details. It has been tested on the following platforms using mtd-utils, UBI and UBIFS: x86 (with nandsim), arm926ejs. Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 10:05:33 +00:00
config MTD_NAND_BCH
tristate
select BCH
depends on MTD_NAND_ECC_BCH
default MTD_NAND
config MTD_NAND_ECC_BCH
bool "Support software BCH ECC"
default n
help
This enables support for software BCH error correction. Binary BCH
codes are more powerful and cpu intensive than traditional Hamming
ECC codes. They are used with NAND devices requiring more than 1 bit
of error correction.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
mtd: common module for smartmedia/xD support This small module implements few helpers that are usefull for nand drivers for SmartMedia/xD card readers. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-22 18:39:39 +00:00
config MTD_SM_COMMON
tristate
default n
[MTD] [NAND] Move ancient NAND chip support into a config option The support for obsolete ancient NAND chips adds .data size and one of the old ids conflicts with a modern one. Make the support for such chips depending on a config option. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 17:30:57 +00:00
config MTD_NAND_MUSEUM_IDS
bool "Enable chip ids for obsolete ancient NAND devices"
default n
help
Enable this option only when your board has first generation
NAND chips (page size 256 byte, erase size 4-8KiB). The IDs
of these chips were reused by later, larger chips.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_AUTCPU12
tristate "SmartMediaCard on autronix autcpu12 board"
Use menuconfig objects: MTD Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 21:21:41 +00:00
depends on ARCH_AUTCPU12
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
[MTD] NAND: Clean up trailing white spaces Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 11:15:49 +00:00
This enables the driver for the autronix autcpu12 board to
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
access the SmartMediaCard.
mtd/nand: Add Intel Moorestown/Denali NAND support There is more work to be done on this but it is basically working now. Signed-off-by: Jason Roberts <jason.e.roberts@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-13 14:57:33 +00:00
config MTD_NAND_DENALI
depends on PCI
tristate "Support Denali NAND controller on Intel Moorestown"
help
Enable the driver for NAND flash on Intel Moorestown, using the
Denali NAND controller core.
config MTD_NAND_DENALI_SCRATCH_REG_ADDR
hex "Denali NAND size scratch register address"
default "0xFF108018"
mtd: denali: add Kconfig dependency Signed-off-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-12 10:25:13 +00:00
depends on MTD_NAND_DENALI
mtd/nand: Add Intel Moorestown/Denali NAND support There is more work to be done on this but it is basically working now. Signed-off-by: Jason Roberts <jason.e.roberts@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-13 14:57:33 +00:00
help
Some platforms place the NAND chip size in a scratch register
because (some versions of) the driver aren't able to automatically
determine the size of certain chips. Set the address of the
scratch register here to enable this feature. On Intel Moorestown
boards, the scratch register is at 0xFF108018.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_H1900
tristate "iPAQ H1900 flash"
mtd: nand_h1900 never worked This driver has been broken through all of git history and cannot even be built. Better mark it as broken. Next stop is removing from the tree. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-01 20:03:46 +00:00
depends on ARCH_PXA && BROKEN
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
This enables the driver for the iPAQ h1900 flash.
[MTD] [NAND] GPIO NAND flash driver The patch adds support for NAND flashes connected to GPIOs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-15 06:38:49 +00:00
config MTD_NAND_GPIO
tristate "GPIO NAND Flash driver"
[MTD] [NAND] GPIO driver depends on ARM... for now. Not all architectures provide readsb(). We should probably move to using ioread8_rep() instead. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-20 08:24:43 +00:00
depends on GENERIC_GPIO && ARM
[MTD] [NAND] GPIO NAND flash driver The patch adds support for NAND flashes connected to GPIOs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-15 06:38:49 +00:00
help
This enables a GPIO based NAND flash driver.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_SPIA
tristate "NAND Flash device on SPIA board"
Use menuconfig objects: MTD Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 21:21:41 +00:00
depends on ARCH_P720T
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
If you had to ask, you don't have one. Say 'N'.
[MTD] Add Amstrad Delta NAND support The patch below adds support for the NAND device on the Amstrad Delta. This is a 32MiB 8bit Toshiba device, with the data bus connected to the OMAP MPUIO pins and ALE, CLE, NCE, NRE, NWE and NWP all connected to the Delta's latch2 16bit latch. Signed-Off-By: Jonathan McDowell <noodles@earth.li> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 17:11:55 +00:00
config MTD_NAND_AMS_DELTA
tristate "NAND Flash device on Amstrad E3"
Use menuconfig objects: MTD Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 21:21:41 +00:00
depends on MACH_AMS_DELTA
mtd: nand: ams-delta: select for built-in by default Now that the Amstrad Delta NAND driver is converted to a platform driver, which prevents it from interfering with other unrelated hardware in multiple OMAP1 cpu and machine configurations, it can be automatically configured for being built into the kernel if the Amstrad Delta board is also selected. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-12-15 11:58:15 +00:00
default y
[MTD] Add Amstrad Delta NAND support The patch below adds support for the NAND device on the Amstrad Delta. This is a 32MiB 8bit Toshiba device, with the data bus connected to the OMAP MPUIO pins and ALE, CLE, NCE, NRE, NWE and NWP all connected to the Delta's latch2 16bit latch. Signed-Off-By: Jonathan McDowell <noodles@earth.li> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 17:11:55 +00:00
help
Support for NAND flash on Amstrad E3 (Delta).
mtd: nand: add OMAP2/OMAP3 NAND driver This driver is present in the OMAP tree, now pushing it to MTD. Original author(s): Jian Zhang <jzhang@ti.com> Signed-off-by: Vimal Singh <vimalsingh@ti.com> Cc: Jian Zhang <jzhang@ti.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-12 20:47:03 +00:00
config MTD_NAND_OMAP2
mtd: use MTD_NAND_OMAP2 for OMAP4 use MTD_NAND_OMAP2 also for OMAP4 arch. testes with omap4430 Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-07-20 07:28:04 +00:00
tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
mtd: nand: Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS instead of oring with ARCH2/3/4. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-11-16 05:18:00 +00:00
depends on ARCH_OMAP2PLUS
mtd: nand: add OMAP2/OMAP3 NAND driver This driver is present in the OMAP tree, now pushing it to MTD. Original author(s): Jian Zhang <jzhang@ti.com> Signed-off-by: Vimal Singh <vimalsingh@ti.com> Cc: Jian Zhang <jzhang@ti.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-12 20:47:03 +00:00
help
mtd: use MTD_NAND_OMAP2 for OMAP4 use MTD_NAND_OMAP2 also for OMAP4 arch. testes with omap4430 Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-07-20 07:28:04 +00:00
Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
platforms.
mtd: nand: add OMAP2/OMAP3 NAND driver This driver is present in the OMAP tree, now pushing it to MTD. Original author(s): Jian Zhang <jzhang@ti.com> Signed-off-by: Vimal Singh <vimalsingh@ti.com> Cc: Jian Zhang <jzhang@ti.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-12 20:47:03 +00:00
mtd: nand: omap: add support for hardware BCH ecc Two modes are supported: 4-bit and 8-bit error correction. Note that 4-bit mode is only confirmed to work on OMAP3630 ES 1.x, x >= 1. The OMAP3 GPMC hardware BCH engine computes remainder polynomials, it does not provide automatic error location and correction: this step is implemented using the BCH library. This implementation only protects page data, there is no support for protecting user-defined spare area bytes (this could be added with few modifications); therefore, it cannot be used with YAFFS2 or other similar filesystems that depend on oob storage. Before being stored to nand flash, hardware BCH ecc is adjusted so that an erased page has a valid ecc; thus allowing correction of bitflips in blank pages (also common on 4-bit devices). BCH correction mode is selected at runtime by setting platform data parameter 'ecc_opt' to value OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW. This code has been tested with mtd test modules, UBI and UBIFS on a BeagleBoard revC3 (OMAP3530 ES3.0 + Micron NAND 256MiB 1,8V 16-bit). Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-04-30 10:17:18 +00:00
config MTD_NAND_OMAP_BCH
depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
bool "Enable support for hardware BCH error correction"
default n
select BCH
select BCH_CONST_PARAMS
help
Support for hardware BCH error correction.
choice
prompt "BCH error correction capability"
depends on MTD_NAND_OMAP_BCH
config MTD_NAND_OMAP_BCH8
bool "8 bits / 512 bytes (recommended)"
help
Support correcting up to 8 bitflips per 512-byte block.
This will use 13 bytes of spare area per 512 bytes of page data.
This is the recommended mode, as 4-bit mode does not work
on some OMAP3 revisions, due to a hardware bug.
config MTD_NAND_OMAP_BCH4
bool "4 bits / 512 bytes"
help
Support correcting up to 4 bitflips per 512-byte block.
This will use 7 bytes of spare area per 512 bytes of page data.
Note that this mode does not work on some OMAP3 revisions, due to a
hardware bug. Please check your OMAP datasheet before selecting this
mode.
endchoice
if MTD_NAND_OMAP_BCH
config BCH_CONST_M
default 13
config BCH_CONST_T
default 4 if MTD_NAND_OMAP_BCH4
default 8 if MTD_NAND_OMAP_BCH8
endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_IDS
tristate
mtd: nand: Add driver for Ricoh xD/SmartMedia reader This adds a driver for Ricoh R5C852 xD card reader. This reader is a part of larger mulifunction chip and found at least in R5C832 Driver is complete, but bewere of the fact that some (probably only type M) xD cards are 'fake' which means that they have an on board CPU and expose emulated nand command set These cards don't even store the oob area on the flash, but generate it on the fly from something else. Thus they demand to have proper values written in the oob area, and therefore only useful with SmartMedia FTL. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-22 18:39:42 +00:00
config MTD_NAND_RICOH
tristate "Ricoh xD card reader"
default n
mtd/nand/r852: fix build for CONFIG_PCI disabled r852 fails to build when CONFIG_PCI is not enabled since it uses pci_*() calls and is a PCI driver, so it should depend on PCI to prevent build errors. It should also #include <linux/pci.h>. drivers/mtd/nand/r852.c:1053: error: implicit declaration of function 'pci_prepare_to_sleep' drivers/mtd/nand/r852.c:1062: error: implicit declaration of function 'pci_back_from_sleep' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-11 17:10:32 +00:00
depends on PCI
mtd: nand: Add driver for Ricoh xD/SmartMedia reader This adds a driver for Ricoh R5C852 xD card reader. This reader is a part of larger mulifunction chip and found at least in R5C832 Driver is complete, but bewere of the fact that some (probably only type M) xD cards are 'fake' which means that they have an on board CPU and expose emulated nand command set These cards don't even store the oob area on the flash, but generate it on the fly from something else. Thus they demand to have proper values written in the oob area, and therefore only useful with SmartMedia FTL. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-22 18:39:42 +00:00
select MTD_SM_COMMON
help
Enable support for Ricoh R5C852 xD card reader
You also need to enable ether
NAND SSFDC (SmartMedia) read only translation layer' or new
expermental, readwrite
'SmartMedia/xD new translation layer'
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_AU1550
[MTD] NAND: Alchemy board driver cleanup - cleaned up the partitions and include files - added more flexible CS and address detection and setup Regression tested on db1200 and db1550. Signed-off-by: Pete Popov <ppopov@pacbell.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-09-23 01:44:58 +00:00
tristate "Au1550/1200 NAND support"
MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-08-12 09:39:45 +00:00
depends on MIPS_ALCHEMY
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
This enables the driver for the NAND flash controller on the
AMD/Alchemy 1550 SOC.
[MTD] [NAND] Blackfin on-chip NAND Flash Controller driver This is the driver for latest Blackfin on-chip nand flash controller - use nand_chip and mtd_info common nand driver interface - provide both PIO and dma operation - compiled with ezkit bf548 configuration - use hardware 1-bit ECC - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs ChangeLog from try#1 - use hweight32() instead of count_bits() - replace bf54x with bf5xx and BF54X with BF5XX - compare against plat->page_size in 2 cases when enable hardware ECC ChangeLog from try#2 - passed nand_test suites - use cpu_relax() instead of busy wait loop - some coding style issue pointed out by Andrew Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-02 20:56:05 +00:00
config MTD_NAND_BF5XX
tristate "Blackfin on-chip NAND Flash Controller driver"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on BF54x || BF52x
[MTD] [NAND] Blackfin on-chip NAND Flash Controller driver This is the driver for latest Blackfin on-chip nand flash controller - use nand_chip and mtd_info common nand driver interface - provide both PIO and dma operation - compiled with ezkit bf548 configuration - use hardware 1-bit ECC - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs ChangeLog from try#1 - use hweight32() instead of count_bits() - replace bf54x with bf5xx and BF54X with BF5XX - compare against plat->page_size in 2 cases when enable hardware ECC ChangeLog from try#2 - passed nand_test suites - use cpu_relax() instead of busy wait loop - some coding style issue pointed out by Andrew Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-02 20:56:05 +00:00
help
This enables the Blackfin on-chip NAND flash controller
No board specific support is done by this driver, each board
must advertise a platform_device for the driver to attach.
This driver can also be built as a module. If so, the module
will be called bf5xx-nand.
config MTD_NAND_BF5XX_HWECC
bool "BF5XX NAND Hardware ECC"
[MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-30 19:35:02 +00:00
default y
[MTD] [NAND] Blackfin on-chip NAND Flash Controller driver This is the driver for latest Blackfin on-chip nand flash controller - use nand_chip and mtd_info common nand driver interface - provide both PIO and dma operation - compiled with ezkit bf548 configuration - use hardware 1-bit ECC - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs ChangeLog from try#1 - use hweight32() instead of count_bits() - replace bf54x with bf5xx and BF54X with BF5XX - compare against plat->page_size in 2 cases when enable hardware ECC ChangeLog from try#2 - passed nand_test suites - use cpu_relax() instead of busy wait loop - some coding style issue pointed out by Andrew Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-02 20:56:05 +00:00
depends on MTD_NAND_BF5XX
help
Enable the use of the BF5XX's internal ECC generator when
using NAND.
[MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-30 19:35:01 +00:00
config MTD_NAND_BF5XX_BOOTROM_ECC
bool "Use Blackfin BootROM ECC Layout"
default n
depends on MTD_NAND_BF5XX_HWECC
help
If you wish to modify NAND pages and allow the Blackfin on-chip
BootROM to boot from them, say Y here. This is only necessary
if you are booting U-Boot out of NAND and you wish to update
U-Boot from Linux' userspace. Otherwise, you should say N here.
If unsure, say N.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_RTC_FROM4
tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
Use menuconfig objects: MTD Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 21:21:41 +00:00
depends on SH_SOLUTION_ENGINE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
select REED_SOLOMON
select REED_SOLOMON_DEC8
[MTD] [NAND] rtc_from4.c: use lib/bitrev.c This patch converts drivers/mtd/nand/rtc_from4.c to use the new lib/bitrev.c Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-11-22 04:38:11 +00:00
select BITREVERSE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
[MTD] NAND: Clean up trailing white spaces Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 11:15:49 +00:00
This enables the driver for the Renesas Technology AG-AND
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
flash interface board (FROM_BOARD4)
config MTD_NAND_PPCHAMELEONEVB
tristate "NAND Flash device on PPChameleonEVB board"
Use menuconfig objects: MTD Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 21:21:41 +00:00
depends on PPCHAMELEONEVB && BROKEN
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
This enables the NAND flash driver on the PPChameleon EVB Board.
config MTD_NAND_S3C2410
mtd/nand: s3c6400 support for s3c2410 driver Add s3c6400 support to the s3c2410 driver. The nand controller in the s3c64xx devices is compatible with the one in the s3c2412, so simply reuse that code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-07 13:04:23 +00:00
tristate "NAND Flash support for Samsung S3C SoCs"
ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, and S3C2450 SoCs so that we can merge the mach-xxx directories and plat-s3c24xx dir. to just one mach-s3c24xx for them. I think this should be sent to upstream via samsung tree because this touches many samsung stuff. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> [for the gadget part:] Acked-by: Felipe Balbi <balbi@ti.com> [for the framebuffer (video) part:] Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> [For the watchdog-part:] Acked-by: Wim Van Sebroeck <wim@iguana.be> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-02-03 05:29:23 +00:00
depends on ARCH_S3C24XX || ARCH_S3C64XX
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
mtd/nand: s3c6400 support for s3c2410 driver Add s3c6400 support to the s3c2410 driver. The nand controller in the s3c64xx devices is compatible with the one in the s3c2412, so simply reuse that code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-07 13:04:23 +00:00
This enables the NAND flash controller on the S3C24xx and S3C64xx
[MTD] NAND: s3c24xx updates Fix error in timing generation, Tacls is only in the range 0..3 Add proper support for the s3c2440 NAND controller, which has now been tested on several s3c2440 implementations. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-06-20 11:48:25 +00:00
SoCs
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
Trivial typo fixes in Kconfig files (MTD). Signed-off-by: Egry Gábor <gaboregry@t-online.hu> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-12 16:35:02 +00:00
No board specific support is done by this driver, each board
[MTD] NAND: Clean up trailing white spaces Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 11:15:49 +00:00
must advertise a platform_device for the driver to attach.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_S3C2410_DEBUG
mtd/nand: s3c6400 support for s3c2410 driver Add s3c6400 support to the s3c2410 driver. The nand controller in the s3c64xx devices is compatible with the one in the s3c2412, so simply reuse that code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-07 13:04:23 +00:00
bool "Samsung S3C NAND driver debug"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
depends on MTD_NAND_S3C2410
help
mtd/nand: s3c6400 support for s3c2410 driver Add s3c6400 support to the s3c2410 driver. The nand controller in the s3c64xx devices is compatible with the one in the s3c2412, so simply reuse that code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-07 13:04:23 +00:00
Enable debugging of the S3C NAND driver
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_S3C2410_HWECC
mtd/nand: s3c6400 support for s3c2410 driver Add s3c6400 support to the s3c2410 driver. The nand controller in the s3c64xx devices is compatible with the one in the s3c2412, so simply reuse that code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-07 13:04:23 +00:00
bool "Samsung S3C NAND Hardware ECC"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
depends on MTD_NAND_S3C2410
help
mtd/nand: s3c6400 support for s3c2410 driver Add s3c6400 support to the s3c2410 driver. The nand controller in the s3c64xx devices is compatible with the one in the s3c2412, so simply reuse that code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-07 13:04:23 +00:00
Enable the use of the controller's internal ECC generator when
using NAND. Early versions of the chips have had problems with
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
incorrect ECC generation, and if using these, the default of
software ECC is preferable.
[MTD] [NAND] ndfc driver The current ndfc driver only compiles under arch/ppc. This arch was removed from the kernel. I notice the event entry for the ndfc in Kconfig has been removed in 2.6.28. This patch converts the ndfc to a proper OF (OpenFirmware) driver. I can give a working example of the DTS if needed. The patch has been in production use on the PIKA Warp Appliance and is in use by others. The Warp basically boots from NAND, so the ndfc driver is very important to us. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Acked-By: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-10 13:16:34 +00:00
config MTD_NAND_NDFC
tristate "NDFC NanD Flash Controller"
depends on 4xx
select MTD_NAND_ECC_SMC
help
NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
[MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-19 08:29:38 +00:00
config MTD_NAND_S3C2410_CLKSTOP
mtd/nand: s3c6400 support for s3c2410 driver Add s3c6400 support to the s3c2410 driver. The nand controller in the s3c64xx devices is compatible with the one in the s3c2412, so simply reuse that code. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-07 13:04:23 +00:00
bool "Samsung S3C NAND IDLE clock stop"
[MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-19 08:29:38 +00:00
depends on MTD_NAND_S3C2410
default n
help
Stop the clock to the NAND controller when there is no chip
selected to save power. This will mean there is a small delay
when the is NAND chip selected or released, but will save
approximately 5mA of power when there is nothing happening.
mtd: add bcmring nand driver Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-10 02:13:08 +00:00
config MTD_NAND_BCM_UMI
tristate "NAND Flash support for BCM Reference Boards"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on ARCH_BCMRING
mtd: add bcmring nand driver Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-10 02:13:08 +00:00
help
This enables the NAND flash controller on the BCM UMI block.
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 01:57:33 +00:00
No board specific support is done by this driver, each board
mtd: add bcmring nand driver Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-10 02:13:08 +00:00
must advertise a platform_device for the driver to attach.
config MTD_NAND_BCM_UMI_HWCS
bool "BCM UMI NAND Hardware CS"
depends on MTD_NAND_BCM_UMI
help
Enable the use of the BCM UMI block's internal CS using NAND.
This should only be used if you know the external NAND CS can toggle.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
config MTD_NAND_DISKONCHIP
tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
Use menuconfig objects: MTD Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 21:21:41 +00:00
depends on EXPERIMENTAL
MTD: Relax dependencies CONFIG_GENERIC_IO is just enough for the basic MTD stuff. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-02-07 00:22:50 +00:00
depends on HAS_IOMEM
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
select REED_SOLOMON
select REED_SOLOMON_DEC16
help
This is a reimplementation of M-Systems DiskOnChip 2000,
Millennium and Millennium Plus as a standard NAND device driver,
as opposed to the earlier self-contained MTD device drivers.
This should enable, among other things, proper JFFS2 operation on
these devices.
config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
bool "Advanced detection options for DiskOnChip"
depends on MTD_NAND_DISKONCHIP
help
This option allows you to specify nonstandard address at which to
probe for a DiskOnChip, or to change the detection options. You
are unlikely to need any of this unless you are using LinuxBIOS.
Say 'N'.
config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
depends on MTD_NAND_DISKONCHIP
default "0"
---help---
By default, the probe for DiskOnChip devices will look for a
DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
This option allows you to specify a single address at which to probe
for the device, which is useful if you have other devices in that
range which get upset when they are probed.
(Note that on PowerPC, the normal probe will only check at
0xE4000000.)
Normally, you should leave this set to zero, to allow the probe at
the normal addresses.
config MTD_NAND_DISKONCHIP_PROBE_HIGH
bool "Probe high addresses"
depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
help
By default, the probe for DiskOnChip devices will look for a
DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
This option changes to make it probe between 0xFFFC8000 and
0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be
useful to you. Say 'N'.
config MTD_NAND_DISKONCHIP_BBTWRITE
bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
depends on MTD_NAND_DISKONCHIP
help
On DiskOnChip devices shipped with the INFTL filesystem (Millennium
and 2000 TSOP/Alon), Linux reserves some space at the end of the
device for the Bad Block Table (BBT). If you have existing INFTL
data on your device (created by non-Linux tools such as M-Systems'
DOS drivers), your data might overlap the area Linux wants to use for
the BBT. If this is a concern for you, leave this option disabled and
Linux will not write BBT data into this area.
The downside of leaving this option disabled is that if bad blocks
are detected by Linux, they will not be recorded in the BBT, which
could cause future problems.
Once you enable this option, new filesystems (INFTL or others, created
in Linux or other operating systems) will not use the reserved area.
The only reason not to enable this option is to prevent damage to
preexisting filesystems.
Even if you leave this disabled, you can enable BBT writes at module
load time (assuming you build diskonchip as a module) with the module
parameter "inftl_bbt_write=1".
mtd: nand: add support for diskonchip G4 nand flash device This patch adds a driver for the M-Sys / Sandisk diskonchip G4 nand flash found in various smartphones and PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba Portege G900, Asus P526, and O2 XDA Zinc. It was tested on the Treo 680, but should work generically. Since v3, this patch adds power management functions, a scan of the factory bad block table during initialization, several fixes, and more extensive testing. Also, the platform data header file, which only contained partitioning information, was removed. Command-line partitioning can be used, at least until an mtd parser is written for the saftl format with which these chips are shipped. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-04 00:05:44 +00:00
config MTD_NAND_DOCG4
tristate "Support for DiskOnChip G4 (EXPERIMENTAL)"
depends on EXPERIMENTAL
select BCH
select BITREVERSE
help
Support for diskonchip G4 nand flash, found in various smartphones and
PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba
Portege G900, Asus P526, and O2 XDA Zinc.
With this driver you will be able to use UBI and create a ubifs on the
device, so you may wish to consider enabling UBI and UBIFS as well.
These devices ship with the Mys/Sandisk SAFTL formatting, for which
there is currently no mtd parser, so you may want to use command line
partitioning to segregate write-protected blocks. On the Treo680, the
first five erase blocks (256KiB each) are write-protected, followed
by the block containing the saftl partition table. This is probably
typical.
[PATCH] MTD_NAND_SHARPSL and MTD_NAND_NANDSIM should be tristate's MTD_NAND=m and MTD_NAND_SHARPSL=y or MTD_NAND_NANDSIM=y are illegal combinations that mustn't be allowed. This patch fixes this bug by making MTD_NAND_SHARPSL and MTD_NAND_NANDSIM tristate's. Additionally, it fixes some whitespace damage at these options. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: "Artem B. Bityutskiy" <dedekind@yandex.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 10:29:43 +00:00
config MTD_NAND_SHARPSL
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
Use menuconfig objects: MTD Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 21:21:41 +00:00
depends on ARCH_PXA
[PATCH] MTD_NAND_SHARPSL and MTD_NAND_NANDSIM should be tristate's MTD_NAND=m and MTD_NAND_SHARPSL=y or MTD_NAND_NANDSIM=y are illegal combinations that mustn't be allowed. This patch fixes this bug by making MTD_NAND_SHARPSL and MTD_NAND_NANDSIM tristate's. Additionally, it fixes some whitespace damage at these options. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: "Artem B. Bityutskiy" <dedekind@yandex.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 10:29:43 +00:00
Merge git://git.infradead.org/~dwmw2/cafe-2.6 Conflicts: drivers/mtd/nand/Kconfig
2006-10-22 01:17:05 +00:00
config MTD_NAND_CAFE
[MTD] [NAND] Use rslib for CAFÉ ECC Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 10:18:49 +00:00
tristate "NAND support for OLPC CAFÉ chip"
depends on PCI
select REED_SOLOMON
select REED_SOLOMON_DEC16
help
[MTD] [NAND] cafe_nand.c: the OLPC laptop is not available for $100 The price might drop to $100 in a few years. But currently, a more reasonable name might be "$175 laptop". Let's simply call it "OLPC laptop" without any price tag. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-21 23:52:08 +00:00
Use NAND flash attached to the CAFÉ chip designed for the OLPC
[MTD] [NAND] Use rslib for CAFÉ ECC Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-02 10:18:49 +00:00
laptop.
Merge git://git.infradead.org/~dwmw2/cafe-2.6 Conflicts: drivers/mtd/nand/Kconfig
2006-10-22 01:17:05 +00:00
[MTD] Basic NAND driver for AMD/NatSemi CS5535/CS5536 Geode companion chip This lacks hardware ECC support and a few optimisations we're going to want fairly soon, but it works well enough to mount and use JFFS2. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-11 21:35:28 +00:00
config MTD_NAND_CS553X
tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
x86: allow more than 8 cpus to be used on 32-bit X86_PC is the only remaining 'sub' architecture, so we dont need it anymore. This also cleans up a few spurious references to X86_PC in the driver space - those certainly should be X86. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 23:14:46 +00:00
depends on X86_32
[MTD] Add help text for MTD_NAND_CS553X option. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-16 12:11:47 +00:00
help
The CS553x companion chips for the AMD Geode processor
include NAND flash controllers with built-in hardware ECC
capabilities; enabling this option will allow you to use
these. The driver will check the MSRs to verify that the
controller is enabled for NAND, and currently requires that
the controller be in MMIO mode.
trivial: Kconfig: .ko is normally not included in module names .ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-04 22:44:53 +00:00
If you say "m", the module will be called cs553x_nand.
[MTD] Add help text for MTD_NAND_CS553X option. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-16 12:11:47 +00:00
[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:52 +00:00
config MTD_NAND_ATMEL
[MTD] [NAND] atmel_nand can be modular There's no reason to prevent the Atmel NAND driver from building as a module. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-04 06:40:19 +00:00
tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
[MTD] [NAND] atmel_nand: make available on AVR32 Make the atmel_nand driver selectable on AVR32, and update the Kconfig help text to reflect this. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:57 +00:00
depends on ARCH_AT91 || AVR32
[MTD] NAND: AT91 NAND driver This version only differs from version posted by Savin Zlobec (20 Jun 2006) in that the AT91RM9200-specific chip-select / bus setup code has been moved from the at91_nand.c driver into the processor-specific file. From: Savin Zlobec <savin@epico.si> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-19 16:24:35 +00:00
help
Enables support for NAND Flash / Smart Media Card interface
[MTD] [NAND] atmel_nand: make available on AVR32 Make the atmel_nand driver selectable on AVR32, and update the Kconfig help text to reflect this. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:57 +00:00
on Atmel AT91 and AVR32 processors.
[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260 This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 17:51:14 +00:00
choice
[MTD] [NAND] atmel_nand: make available on AVR32 Make the atmel_nand driver selectable on AVR32, and update the Kconfig help text to reflect this. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:57 +00:00
prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:52 +00:00
depends on MTD_NAND_ATMEL
[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260 This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 17:51:14 +00:00
[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:52 +00:00
config MTD_NAND_ATMEL_ECC_HW
[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260 This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 17:51:14 +00:00
bool "Hardware ECC"
[MTD] [NAND] atmel_nand: make available on AVR32 Make the atmel_nand driver selectable on AVR32, and update the Kconfig help text to reflect this. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:57 +00:00
depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260 This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 17:51:14 +00:00
help
[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:52 +00:00
Use hardware ECC instead of software ECC when the chip
supports it.
[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260 This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 17:51:14 +00:00
The hardware ECC controller is capable of single bit error
correction and 2-bit random detection per page.
NB : hardware and software ECC schemes are incompatible.
If you switch from one to another, you'll have to erase your
mtd partition.
If unsure, say Y
[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:52 +00:00
config MTD_NAND_ATMEL_ECC_SOFT
[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260 This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 17:51:14 +00:00
bool "Software ECC"
help
[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:52 +00:00
Use software ECC.
[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260 This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 17:51:14 +00:00
NB : hardware and software ECC schemes are incompatible.
If you switch from one to another, you'll have to erase your
mtd partition.
[MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig The AT91 NAND driver needs just a few tiny modifications to work on AVR32 as well. Rename it atmel_nand to reflect this. Also move the ECC register definitions into drivers/mtd/nand since they are only useful to the atmel_nand driver, and get rid of the useless filename at the top of each file. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-06 16:04:52 +00:00
config MTD_NAND_ATMEL_ECC_NONE
[MTD] [NAND] Hardware ECC controller on at91sam9263 / at91sam9260 This is a patch to use the hardware ECC controller of the AT91SAM9260 and AT91SAM9263 for the AT91 nand. On AT91 NAND, there's now a choice between ECC soft, ECC hard or no ECC (for debug). It has been tested on AT91SAM9263 with 8 bits large and small page NAND. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-23 17:51:14 +00:00
bool "No ECC (testing only, DANGEROUS)"
depends on DEBUG_KERNEL
help
No ECC will be used.
It's not a good idea and it should be reserved for testing
purpose only.
If unsure, say N
endchoice
[MTD] NAND: AT91 NAND driver This version only differs from version posted by Savin Zlobec (20 Jun 2006) in that the AT91RM9200-specific chip-select / bus setup code has been moved from the at91_nand.c driver into the processor-specific file. From: Savin Zlobec <savin@epico.si> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-19 16:24:35 +00:00
[MTD] [NAND] support for pxa3xx This is preliminary since: 1. It supports only _one_ chip select at the moment. As there is no existing platforms available using two chip selects of the NAND controller, it shall really not include code for supporting the 2nd chip select for now, as such code cannot be verified. 2. It resorts to the default and simpliest memory based badblock table 3. Only limited types of nand flash are currently supported. Most PXA3xx processors come with on-chip NAND flash dies, so there isn't much flexibility for other types of NAND. 4. The NAND controller should be configured to detect the device's ID, thus making it difficult to use nand_scan_ident() to assist the detection process (though it's not impossible) TODO: fix all the above limitations of cuz :-) Signed-off-by: eric miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-14 07:48:23 +00:00
config MTD_NAND_PXA3xx
[MTD] [NAND] pxa3xx_nand: allow building as module Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-02-17 11:54:46 +00:00
tristate "Support for NAND flash devices on PXA3xx"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on PXA3xx || ARCH_MMP
[MTD] [NAND] support for pxa3xx This is preliminary since: 1. It supports only _one_ chip select at the moment. As there is no existing platforms available using two chip selects of the NAND controller, it shall really not include code for supporting the 2nd chip select for now, as such code cannot be verified. 2. It resorts to the default and simpliest memory based badblock table 3. Only limited types of nand flash are currently supported. Most PXA3xx processors come with on-chip NAND flash dies, so there isn't much flexibility for other types of NAND. 4. The NAND controller should be configured to detect the device's ID, thus making it difficult to use nand_scan_ident() to assist the detection process (though it's not impossible) TODO: fix all the above limitations of cuz :-) Signed-off-by: eric miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-14 07:48:23 +00:00
help
This enables the driver for the NAND flash device found on
PXA3xx processors
[MTD] [NAND] CM-x270 MTD driver This patch provides MTD support for NAND flash devices on CM-x270 modules. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-22 05:53:21 +00:00
config MTD_NAND_CM_X270
tristate "Support for NAND Flash on CM-X270 modules"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on MACH_ARMCORE
[MTD] [NAND] CM-x270 MTD driver This patch provides MTD support for NAND flash devices on CM-x270 modules. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-22 05:53:21 +00:00
[MTD] [NAND] pasemi_nand driver Plumbing for NAND connected via localbus on PA Semi PWRficient-based boards. From: Egor Martovetsky <egor@pasemi.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-29 00:37:31 +00:00
config MTD_NAND_PASEMI
tristate "NAND support for PA Semi PWRficient"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on PPC_PASEMI
[MTD] [NAND] pasemi_nand driver Plumbing for NAND connected via localbus on PA Semi PWRficient-based boards. From: Egor Martovetsky <egor@pasemi.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-29 00:37:31 +00:00
help
Enables support for NAND Flash interface on PA Semi PWRficient
based boards
[MTD] [NAND] CM-x270 MTD driver This patch provides MTD support for NAND flash devices on CM-x270 modules. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-22 05:53:21 +00:00
mfd: driver for the TMIO NAND controller This patch adds support for the NAND controller commonly found in TMIO based MFDs. Signed-off-by: Ian Molton <spyro@f2s.com> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-15 15:04:22 +00:00
config MTD_NAND_TMIO
tristate "NAND Flash device on Toshiba Mobile IO Controller"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on MFD_TMIO
mfd: driver for the TMIO NAND controller This patch adds support for the NAND controller commonly found in TMIO based MFDs. Signed-off-by: Ian Molton <spyro@f2s.com> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-15 15:04:22 +00:00
help
Support for NAND flash connected to a Toshiba Mobile IO
Controller in some PDAs, including the Sharp SL6000x.
[PATCH] MTD_NAND_SHARPSL and MTD_NAND_NANDSIM should be tristate's MTD_NAND=m and MTD_NAND_SHARPSL=y or MTD_NAND_NANDSIM=y are illegal combinations that mustn't be allowed. This patch fixes this bug by making MTD_NAND_SHARPSL and MTD_NAND_NANDSIM tristate's. Additionally, it fixes some whitespace damage at these options. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: "Artem B. Bityutskiy" <dedekind@yandex.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 10:29:43 +00:00
config MTD_NAND_NANDSIM
tristate "Support for NAND Flash Simulator"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
[MTD] Add help text for MTD_NAND_CS553X option. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-16 12:11:47 +00:00
The simulator may simulate various NAND flash chips for the
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
MTD nand layer.
[PATCH] MTD_NAND_SHARPSL and MTD_NAND_NANDSIM should be tristate's MTD_NAND=m and MTD_NAND_SHARPSL=y or MTD_NAND_NANDSIM=y are illegal combinations that mustn't be allowed. This patch fixes this bug by making MTD_NAND_SHARPSL and MTD_NAND_NANDSIM tristate's. Additionally, it fixes some whitespace damage at these options. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: "Artem B. Bityutskiy" <dedekind@yandex.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 10:29:43 +00:00
mtd: add GPMI-NAND driver in the config and Makefile add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Koen Beel <koen.beel@barco.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-08 02:47:11 +00:00
config MTD_NAND_GPMI_NAND
bool "GPMI NAND Flash Controller driver"
mtd: gpmi: add gpmi support for mx6q add gpmi support for mx6q. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-05-05 01:42:06 +00:00
depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
mtd: add GPMI-NAND driver in the config and Makefile add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Koen Beel <koen.beel@barco.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-08 02:47:11 +00:00
help
Enables NAND Flash support for IMX23 or IMX28.
The GPMI controller is very powerful, with the help of BCH
module, it can do the hardware ECC. The GPMI supports several
NAND flashs at the same time. The GPMI may conflicts with other
block, such as SD card. So pay attention to it when you enable
the GPMI.
[MTD] [NAND] platform NAND driver: add driver This patch adds support for generic platform NAND driver. Updated after tglx's review/discussion in IRC #mtd channel. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-06 15:31:18 +00:00
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
MTD: Relax dependencies CONFIG_GENERIC_IO is just enough for the basic MTD stuff. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-02-07 00:22:50 +00:00
depends on HAS_IOMEM
[MTD] [NAND] platform NAND driver: add driver This patch adds support for generic platform NAND driver. Updated after tglx's review/discussion in IRC #mtd channel. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-06 15:31:18 +00:00
help
This implements a generic NAND driver for on-SOC platform
devices. You will need to provide platform-specific functions
via platform_data.
[MTD] [NAND] Driver for Olympus MAUSB-10 and Fujifilm DPC-R1 card readers Unlike most stuff on the market the chip inside these two allows raw flash access and doesn't implement and FTL, leaving that functionality to the device driver. Raw flash access in a cheap USB cardreader! An MTD test device one can attach to a PC! What a deal! The command set of the chip is not documented, so information was obtained from the existing mass-storage driver (drivers/usb/storage/alauda.c), its documentation (http://alauda.sourceforge.net/wikka.php?wakka=BulkCommandReference), additional reverse engineering and comparison with a vendor driver for a related chip (http://www.ratocsystems.com/english/download/driver/linux/sma03u.html). Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-29 15:57:11 +00:00
config MTD_ALAUDA
[MTD] Fix typo in Alauda config option help text. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-17 21:33:12 +00:00
tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on USB
[MTD] [NAND] Driver for Olympus MAUSB-10 and Fujifilm DPC-R1 card readers Unlike most stuff on the market the chip inside these two allows raw flash access and doesn't implement and FTL, leaving that functionality to the device driver. Raw flash access in a cheap USB cardreader! An MTD test device one can attach to a PC! What a deal! The command set of the chip is not documented, so information was obtained from the existing mass-storage driver (drivers/usb/storage/alauda.c), its documentation (http://alauda.sourceforge.net/wikka.php?wakka=BulkCommandReference), additional reverse engineering and comparison with a vendor driver for a related chip (http://www.ratocsystems.com/english/download/driver/linux/sma03u.html). Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-29 15:57:11 +00:00
help
These two (and possibly other) Alauda-based cardreaders for
SmartMedia and xD allow raw flash access.
[MTD] [NAND] platform NAND driver: add driver This patch adds support for generic platform NAND driver. Updated after tglx's review/discussion in IRC #mtd channel. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-05-06 15:31:18 +00:00
[MTD] [NAND] Marvell Orion device bus NAND controller Driver for the device bus NAND controller in the Marvell Orion family of ARM SoCs. Signed-off-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Jörn Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-16 23:10:40 +00:00
config MTD_NAND_ORION
tristate "NAND Flash support for Marvell Orion SoC"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on PLAT_ORION
[MTD] [NAND] Marvell Orion device bus NAND controller Driver for the device bus NAND controller in the Marvell Orion family of ARM SoCs. Signed-off-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Jörn Engel <joern@logfs.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-16 23:10:40 +00:00
help
This enables the NAND flash controller on Orion machines.
No board specific support is done by this driver, each board
must advertise a platform_device for the driver to attach.
[MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-06 21:36:21 +00:00
config MTD_NAND_FSL_ELBC
tristate "NAND support for Freescale eLBC controllers"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on PPC_OF
P4080/eLBC: Make Freescale elbc interrupt common to elbc devices Move Freescale elbc interrupt from nand driver to elbc driver. Then all elbc devices can use the interrupt instead of ONLY nand. For former nand driver, it had the two functions: 1. detecting nand flash partitions; 2. registering elbc interrupt. Now, second function is removed to fsl_lbc.c. Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Wood Scott-B07421 <B07421@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-18 07:22:31 +00:00
select FSL_LBC
[MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support. Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-06 21:36:21 +00:00
help
Various Freescale chips, including the 8313, include a NAND Flash
Controller Module with built-in hardware ECC capabilities.
Enabling this option will enable you to use this to control
external NAND devices.
NAND Machine support for Integrated Flash Controller Integrated Flash Controller(IFC) can be used to hook NAND Flash chips using NAND Flash Machine available on it. Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Liu Shuo <b35362@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-15 05:34:23 +00:00
config MTD_NAND_FSL_IFC
tristate "NAND support for Freescale IFC controller"
depends on MTD_NAND && FSL_SOC
select FSL_IFC
help
Various Freescale chips e.g P1010, include a NAND Flash machine
with built-in hardware ECC capabilities.
Enabling this option will enable you to use this to control
external NAND devices.
[MTD] [NAND] FSL UPM NAND driver This is very simple driver, NAND is connected through localbus, and User-Programmable Machine is doing various adjustments to speak NAND. No special efforts needed to do read and write cycles, though to control ALE and CLE phases, we ask UPM to generate exact pre-programmed signals on the localbus lines. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-03-11 19:33:13 +00:00
config MTD_NAND_FSL_UPM
tristate "Support for NAND on Freescale UPM"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on PPC_83xx || PPC_85xx
[MTD] [NAND] FSL UPM NAND driver This is very simple driver, NAND is connected through localbus, and User-Programmable Machine is doing various adjustments to speak NAND. No special efforts needed to do read and write cycles, though to control ALE and CLE phases, we ask UPM to generate exact pre-programmed signals on the localbus lines. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-03-11 19:33:13 +00:00
select FSL_LBC
help
Enables support for NAND Flash chips wired onto Freescale PowerPC
processor localbus with User-Programmable Machine support.
mtd: nand: Add MPC5121 NAND Flash Controller driver Adds NAND Flash Controller driver for MPC5121 Revision 2. All device features, except hardware ECC and power management, are supported. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-15 17:35:05 +00:00
config MTD_NAND_MPC5121_NFC
tristate "MPC5121 built-in NAND Flash Controller support"
depends on PPC_MPC512x
help
This enables the driver for the NAND flash controller on the
MPC5121 SoC.
[MTD] [NAND] Freescale i.MX2 NAND driver This patch adds support for the integrated NAND flash controller of the i.MX2 and i.MX3 family. It is tested on MX27 but should work on MX3 aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-02 15:16:59 +00:00
config MTD_NAND_MXC
tristate "MXC NAND support"
ARM: imx5x: clean up ARCH_MX5X Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc using ARCH_MX5X. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-03 08:40:02 +00:00
depends on IMX_HAVE_PLATFORM_MXC_NAND
[MTD] [NAND] Freescale i.MX2 NAND driver This patch adds support for the integrated NAND flash controller of the i.MX2 and i.MX3 family. It is tested on MX27 but should work on MX3 aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-02 15:16:59 +00:00
help
This enables the driver for the NAND flash controller on the
MXC processors.
mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board) Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-29 16:51:56 +00:00
config MTD_NAND_NOMADIK
tristate "ST Nomadik 8815 NAND support"
depends on ARCH_NOMADIK
help
Driver for the NAND flash controller on the Nomadik, with ECC.
[MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL Several Renesas SuperH CPU has FLCTL. The FLCTL support NAND Flash. This driver support SH7723. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-14 12:23:26 +00:00
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on SUPERH || ARCH_SHMOBILE
[MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL Several Renesas SuperH CPU has FLCTL. The FLCTL support NAND Flash. This driver support SH7723. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-14 12:23:26 +00:00
help
Several Renesas SuperH CPU has FLCTL. This option enables support
mtd: trivial sh_flctl changes This patch contains a few changes for the sh_flctl driver: - not sh7723-only driver - get rid of kconfig dependency - use dev_err() instead of printk() - use __devinit and __devexit for probe()/remove() - fix probe() return values Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02 04:01:25 +00:00
for NAND Flash using FLCTL.
[MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL Several Renesas SuperH CPU has FLCTL. The FLCTL support NAND Flash. This driver support SH7723. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-14 12:23:26 +00:00
[MTD] [NAND] davinci_nand driver This is a device driver for the NAND flash controller found on the various DaVinci family chips. It handles up to four SoC chipselects, and some flavors of secondary chipselect (e.g. based on upper bits of the address bus) as used with some multichip packages. (Including the 2 GiB chips used on some TI devel boards.) The 1-bit ECC hardware is supported (3 bytes ECC per 512 bytes data); but not yet the newer 4-bit ECC (10 bytes ECC per 512 bytes data), as available on chips like the DM355 or OMAP-L137 and needed with the more error-prone MLC NAND chips. This is a cleaned-up version of code that's been in use for several years now; sanity checked with the new drivers/mtd/tests. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-04 20:01:37 +00:00
config MTD_NAND_DAVINCI
tristate "Support NAND on DaVinci SoC"
depends on ARCH_DAVINCI
help
Enable the driver for NAND flash chips on Texas Instruments
DaVinci processors.
[MTD] TXx9 SoC NAND Flash Memory Controller driver This patch adds support for the integrated NAND flash controller of the TXx9 family. Once upon a time there were tx4925ndfmc and tx4938ndfmc driver. They were removed due to bitrot in 2005. This new driver is completely rewritten based on a driver in CELF patch archive. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Bächle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-04 20:01:34 +00:00
config MTD_NAND_TXX9NDFMC
tristate "NAND Flash support for TXx9 SoC"
depends on SOC_TX4938 || SOC_TX4939
help
This enables the NAND flash controller on the TXx9 SoCs.
[MTD] [NAND] Add support for NAND on the Socrates board Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-25 10:48:38 +00:00
config MTD_NAND_SOCRATES
tristate "Support for NAND on Socrates board"
mtd: remove redundant dependency checks in Kconfig files Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them. Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca> Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-08 13:48:22 +00:00
depends on SOCRATES
[MTD] [NAND] Add support for NAND on the Socrates board Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-25 10:48:38 +00:00
help
Enables support for NAND Flash chips wired onto Socrates board.
mtd: nand: rename w90p910_nand.c to nuc900_nand.c Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-01-01 12:16:47 +00:00
config MTD_NAND_NUC900
tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
mtd: kill CONFIG_MTD_PARTITIONS Now that none of the drivers use CONFIG_MTD_PARTITIONS we can remove it from Kconfig and the last remaining uses. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-23 09:23:43 +00:00
depends on ARCH_W90X900
mtd: add nand support for w90p910 (v2) Add w90p910 NAND driver for w90p910 evaluation board based on w90p910,there is a K8F1G08 NAND on my board. [dwmw2: depend on MTD_PARTITIONS] Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-10 07:17:27 +00:00
help
This enables the driver for the NAND Flash on evaluation board based
mtd: nand: rename w90p910_nand.c to nuc900_nand.c Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-01-01 12:16:47 +00:00
on w90p910 / NUC9xx.
mtd: add nand support for w90p910 (v2) Add w90p910 NAND driver for w90p910 evaluation board based on w90p910,there is a K8F1G08 NAND on my board. [dwmw2: depend on MTD_PARTITIONS] Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-10 07:17:27 +00:00
MTD: Nand: Add JZ4740 NAND driver Add support for the NAND controller on JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1470/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-17 11:15:29 +00:00
config MTD_NAND_JZ4740
tristate "Support for JZ4740 SoC NAND controller"
depends on MACH_JZ4740
help
Enables support for NAND Flash on JZ4740 SoC based boards.
mtd: generic FSMC NAND MTD driver This is the same driver submitted by ST Micros SPEAr team but generalized and tested on the ST-Ericsson U300. It probably easily works on the NHK8815 too. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-12 22:35:22 +00:00
config MTD_NAND_FSMC
tristate "Support for NAND on ST Micros FSMC"
depends on PLAT_SPEAR || PLAT_NOMADIK || MACH_U300
help
Enables support for NAND Flash chips on the ST Microelectronics
Flexible Static Memory Controller (FSMC)
Use menuconfig objects: MTD Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 21:21:41 +00:00
endif # MTD_NAND
Reference in a new issue Copy permalink