linux/arch/x86/kernel/mfgpt_32.c

411 lines
10 KiB
C
Raw Normal View History

/*
* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
*
* Copyright (C) 2006, Advanced Micro Devices, Inc.
* Copyright (C) 2007, Andres Salomon <dilinger@debian.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book.
*/
/*
* We are using the 32.768kHz input clock - it's the only one that has the
* ranges we find desirable. The following table lists the suitable
* divisors and the associated Hz, minimum interval and the maximum interval:
*
* Divisor Hz Min Delta (s) Max Delta (s)
* 1 32768 .00048828125 2.000
* 2 16384 .0009765625 4.000
* 4 8192 .001953125 8.000
* 8 4096 .00390625 16.000
* 16 2048 .0078125 32.000
* 32 1024 .015625 64.000
* 64 512 .03125 128.000
* 128 256 .0625 256.000
* 256 128 .125 512.000
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/geode.h>
#define MFGPT_DEFAULT_IRQ 7
static struct mfgpt_timer_t {
unsigned int avail:1;
} mfgpt_timers[MFGPT_MAX_TIMERS];
/* Selected from the table above */
#define MFGPT_DIVISOR 16
#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
#define MFGPT_HZ (32768 / MFGPT_DIVISOR)
#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
/* Allow for disabling of MFGPTs */
static int disable;
static int __init mfgpt_disable(char *s)
{
disable = 1;
return 1;
}
__setup("nomfgpt", mfgpt_disable);
/* Reset the MFGPT timers. This is required by some broken BIOSes which already
* do the same and leave the system in an unstable state. TinyBIOS 0.98 is
* affected at least (0.99 is OK with MFGPT workaround left to off).
*/
static int __init mfgpt_fix(char *s)
{
u32 val, dummy;
/* The following udocumented bit resets the MFGPT timers */
val = 0xFF; dummy = 0;
wrmsr(MSR_MFGPT_SETUP, val, dummy);
return 1;
}
__setup("mfgptfix", mfgpt_fix);
/*
* Check whether any MFGPTs are available for the kernel to use. In most
* cases, firmware that uses AMD's VSA code will claim all timers during
* bootup; we certainly don't want to take them if they're already in use.
* In other cases (such as with VSAless OpenFirmware), the system firmware
* leaves timers available for us to use.
*/
static int timers = -1;
static void geode_mfgpt_detect(void)
{
int i;
u16 val;
timers = 0;
if (disable) {
printk(KERN_INFO "geode-mfgpt: MFGPT support is disabled\n");
goto done;
}
if (!geode_get_dev_base(GEODE_DEV_MFGPT)) {
printk(KERN_INFO "geode-mfgpt: MFGPT LBAR is not set up\n");
goto done;
}
for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
if (!(val & MFGPT_SETUP_SETUP)) {
mfgpt_timers[i].avail = 1;
timers++;
}
}
done:
printk(KERN_INFO "geode-mfgpt: %d MFGPT timers available.\n", timers);
}
int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
{
u32 msr, mask, value, dummy;
int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
return -EIO;
/*
* The register maps for these are described in sections 6.17.1.x of
* the AMD Geode CS5536 Companion Device Data Book.
*/
switch (event) {
case MFGPT_EVENT_RESET:
/*
* XXX: According to the docs, we cannot reset timers above
* 6; that is, resets for 7 and 8 will be ignored. Is this
* a problem? -dilinger
*/
msr = MSR_MFGPT_NR;
mask = 1 << (timer + 24);
break;
case MFGPT_EVENT_NMI:
msr = MSR_MFGPT_NR;
mask = 1 << (timer + shift);
break;
case MFGPT_EVENT_IRQ:
msr = MSR_MFGPT_IRQ;
mask = 1 << (timer + shift);
break;
default:
return -EIO;
}
rdmsr(msr, value, dummy);
if (enable)
value |= mask;
else
value &= ~mask;
wrmsr(msr, value, dummy);
return 0;
}
EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable)
{
u32 zsel, lpc, dummy;
int shift;
if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
return -EIO;
/*
* Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
* is using the same CMP of the timer's Siamese twin, the IRQ is set to
* 2, and we mustn't use nor change it.
* XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
* IRQ of the 1st. This can only happen if forcing an IRQ, calling this
* with *irq==0 is safe. Currently there _are_ no 2 drivers.
*/
rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4;
if (((zsel >> shift) & 0xF) == 2)
return -EIO;
/* Choose IRQ: if none supplied, keep IRQ already set or use default */
if (!*irq)
*irq = (zsel >> shift) & 0xF;
if (!*irq)
*irq = MFGPT_DEFAULT_IRQ;
/* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
if (*irq < 1 || *irq == 2 || *irq > 15)
return -EIO;
rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
if (lpc & (1 << *irq))
return -EIO;
/* All chosen and checked - go for it */
if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
return -EIO;
if (enable) {
zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
}
return 0;
}
static int mfgpt_get(int timer)
{
mfgpt_timers[timer].avail = 0;
printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer);
return timer;
}
int geode_mfgpt_alloc_timer(int timer, int domain)
{
int i;
if (timers == -1) {
/* timers haven't been detected yet */
geode_mfgpt_detect();
}
if (!timers)
return -1;
if (timer >= MFGPT_MAX_TIMERS)
return -1;
if (timer < 0) {
/* Try to find an available timer */
for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
if (mfgpt_timers[i].avail)
return mfgpt_get(i);
if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
break;
}
} else {
/* If they requested a specific timer, try to honor that */
if (mfgpt_timers[timer].avail)
return mfgpt_get(timer);
}
/* No timers available - too bad */
return -1;
}
EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
#ifdef CONFIG_GEODE_MFGPT_TIMER
/*
* The MFPGT timers on the CS5536 provide us with suitable timers to use
* as clock event sources - not as good as a HPET or APIC, but certainly
* better than the PIT. This isn't a general purpose MFGPT driver, but
* a simplified one designed specifically to act as a clock event source.
* For full details about the MFGPT, please consult the CS5536 data sheet.
*/
#include <linux/clocksource.h>
#include <linux/clockchips.h>
static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
static u16 mfgpt_event_clock;
static int irq;
static int __init mfgpt_setup(char *str)
{
get_option(&str, &irq);
return 1;
}
__setup("mfgpt_irq=", mfgpt_setup);
static void mfgpt_disable_timer(u16 clock)
{
/* avoid races by clearing CMP1 and CMP2 unconditionally */
geode_mfgpt_write(clock, MFGPT_REG_SETUP, (u16) ~MFGPT_SETUP_CNTEN |
MFGPT_SETUP_CMP1 | MFGPT_SETUP_CMP2);
}
static int mfgpt_next_event(unsigned long, struct clock_event_device *);
static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);
static struct clock_event_device mfgpt_clockevent = {
.name = "mfgpt-timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = mfgpt_set_mode,
.set_next_event = mfgpt_next_event,
.rating = 250,
.cpumask = cpu_all_mask,
.shift = 32
};
static void mfgpt_start_timer(u16 delta)
{
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
}
static void mfgpt_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
mfgpt_disable_timer(mfgpt_event_clock);
if (mode == CLOCK_EVT_MODE_PERIODIC)
mfgpt_start_timer(MFGPT_PERIODIC);
mfgpt_tick_mode = mode;
}
static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
{
mfgpt_start_timer(delta);
return 0;
}
static irqreturn_t mfgpt_tick(int irq, void *dev_id)
{
u16 val = geode_mfgpt_read(mfgpt_event_clock, MFGPT_REG_SETUP);
/* See if the interrupt was for us */
if (!(val & (MFGPT_SETUP_SETUP | MFGPT_SETUP_CMP2 | MFGPT_SETUP_CMP1)))
return IRQ_NONE;
/* Turn off the clock (and clear the event) */
mfgpt_disable_timer(mfgpt_event_clock);
if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
return IRQ_HANDLED;
/* Clear the counter */
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
/* Restart the clock in periodic mode */
if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
}
mfgpt_clockevent.event_handler(&mfgpt_clockevent);
return IRQ_HANDLED;
}
static struct irqaction mfgptirq = {
.handler = mfgpt_tick,
.flags = IRQF_DISABLED | IRQF_NOBALANCING,
.name = "mfgpt-timer"
};
int __init mfgpt_timer_setup(void)
{
int timer, ret;
u16 val;
timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
if (timer < 0) {
printk(KERN_ERR
"mfgpt-timer: Could not allocate a MFPGT timer\n");
return -ENODEV;
}
mfgpt_event_clock = timer;
/* Set up the IRQ on the MFGPT side */
if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) {
printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
return -EIO;
}
/* And register it with the kernel */
ret = setup_irq(irq, &mfgptirq);
if (ret) {
printk(KERN_ERR
"mfgpt-timer: Unable to set up the interrupt.\n");
goto err;
}
/* Set the clock scale and enable the event mode for CMP2 */
val = MFGPT_SCALE | (3 << 8);
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
/* Set up the clock event */
mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
mfgpt_clockevent.shift);
mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
&mfgpt_clockevent);
mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
&mfgpt_clockevent);
printk(KERN_INFO
"mfgpt-timer: Registering MFGPT timer %d as a clock event, using IRQ %d\n",
timer, irq);
clockevents_register_device(&mfgpt_clockevent);
return 0;
err:
geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq);
printk(KERN_ERR
"mfgpt-timer: Unable to set up the MFGPT clock source\n");
return -EIO;
}
#endif