q3k
/
linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux/fs/f2fs/recovery.c

403 lines
9.4 KiB
C
Raw Normal View History

f2fs: adjust kernel coding style As pointed out by Randy Dunlap, this patch removes all usage of "/**" for comment blocks. Instead, just use "/*". Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-29 04:28:09 +00:00
/*
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
* fs/f2fs/recovery.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/fs.h>
#include <linux/f2fs_fs.h>
#include "f2fs.h"
#include "node.h"
#include "segment.h"
static struct kmem_cache *fsync_entry_slab;
bool space_for_roll_forward(struct f2fs_sb_info *sbi)
{
if (sbi->last_valid_block_count + sbi->alloc_valid_block_count
> sbi->user_block_count)
return false;
return true;
}
static struct fsync_inode_entry *get_fsync_inode(struct list_head *head,
nid_t ino)
{
struct list_head *this;
struct fsync_inode_entry *entry;
list_for_each(this, head) {
entry = list_entry(this, struct fsync_inode_entry, list);
if (entry->inode->i_ino == ino)
return entry;
}
return NULL;
}
static int recover_dentry(struct page *ipage, struct inode *inode)
{
struct f2fs_node *raw_node = (struct f2fs_node *)kmap(ipage);
struct f2fs_inode *raw_inode = &(raw_node->i);
f2fs: get rid of fake on-stack dentries those should never be used for a lot of reasons... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-25 21:15:43 +00:00
struct qstr name;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
struct f2fs_dir_entry *de;
struct page *page;
struct inode *dir;
int err = 0;
if (!is_dent_dnode(ipage))
goto out;
dir = f2fs_iget(inode->i_sb, le32_to_cpu(raw_inode->i_pino));
if (IS_ERR(dir)) {
f2fs: recover when journal contains deleted files When recovering a journal file with fsync data for files that have been deleted, don't bail out on recovery. Signed-off-by: Chris Fries <C.Fries@motorola.com> Reviewed-by: Russell Knize <rknize2@motorola.com> Reviewed-by: Jason Hrycay <jason.hrycay@motorola.com> [Jaegeuk Kim: fit the coding style] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-02 21:09:05 +00:00
err = PTR_ERR(dir);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
goto out;
}
f2fs: get rid of fake on-stack dentries those should never be used for a lot of reasons... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-25 21:15:43 +00:00
name.len = le32_to_cpu(raw_inode->i_namelen);
name.name = raw_inode->i_name;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
f2fs: get rid of fake on-stack dentries those should never be used for a lot of reasons... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-25 21:15:43 +00:00
de = f2fs_find_entry(dir, &name, &page);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
if (de) {
kunmap(page);
f2fs_put_page(page, 0);
} else {
Merge branch 'f2fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into dev Pull f2fs cleanup patches from Al Viro: f2fs: get rid of fake on-stack dentries f2fs: switch init_inode_metadata() to passing parent and name separately f2fs: switch new_inode_page() from dentry to qstr f2fs: init_dent_inode() should take qstr Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Conflicts: fs/f2fs/recovery.c
2013-02-11 22:17:20 +00:00
err = __f2fs_add_link(dir, &name, inode);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
iput(dir);
out:
kunmap(ipage);
return err;
}
static int recover_inode(struct inode *inode, struct page *node_page)
{
void *kaddr = page_address(node_page);
struct f2fs_node *raw_node = (struct f2fs_node *)kaddr;
struct f2fs_inode *raw_inode = &(raw_node->i);
f2fs: fix endian conversion bugs reported by sparse This patch should resolve the bugs reported by the sparse tool. Initial reports were written by "kbuild test robot" managed by fengguang.wu. In my local machines, I've tested also by running: > make C=2 CF="-D__CHECK_ENDIAN__" Accordingly, I've found lots of warnings and bugs related to the endian conversion. And I've fixed all at this moment. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-28 07:12:41 +00:00
inode->i_mode = le16_to_cpu(raw_inode->i_mode);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
i_size_write(inode, le64_to_cpu(raw_inode->i_size));
inode->i_atime.tv_sec = le64_to_cpu(raw_inode->i_mtime);
inode->i_ctime.tv_sec = le64_to_cpu(raw_inode->i_ctime);
inode->i_mtime.tv_sec = le64_to_cpu(raw_inode->i_mtime);
inode->i_atime.tv_nsec = le32_to_cpu(raw_inode->i_mtime_nsec);
inode->i_ctime.tv_nsec = le32_to_cpu(raw_inode->i_ctime_nsec);
inode->i_mtime.tv_nsec = le32_to_cpu(raw_inode->i_mtime_nsec);
return recover_dentry(node_page, inode);
}
static int find_fsync_dnodes(struct f2fs_sb_info *sbi, struct list_head *head)
{
unsigned long long cp_ver = le64_to_cpu(sbi->ckpt->checkpoint_ver);
struct curseg_info *curseg;
struct page *page;
block_t blkaddr;
int err = 0;
/* get node pages in the current segment */
curseg = CURSEG_I(sbi, CURSEG_WARM_NODE);
blkaddr = START_BLOCK(sbi, curseg->segno) + curseg->next_blkoff;
/* read node page */
page = alloc_page(GFP_F2FS_ZERO);
if (IS_ERR(page))
return PTR_ERR(page);
lock_page(page);
while (1) {
struct fsync_inode_entry *entry;
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
err = f2fs_readpage(sbi, page, blkaddr, READ_SYNC);
if (err)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
goto out;
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
lock_page(page);
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
if (cp_ver != cpver_of_node(page))
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
goto unlock_out;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
if (!is_fsync_dnode(page))
goto next;
entry = get_fsync_inode(head, ino_of_node(page));
if (entry) {
entry->blkaddr = blkaddr;
if (IS_INODE(page) && is_dent_dnode(page))
set_inode_flag(F2FS_I(entry->inode),
FI_INC_LINK);
} else {
if (IS_INODE(page) && is_dent_dnode(page)) {
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
err = recover_inode_page(sbi, page);
if (err)
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
goto unlock_out;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
/* add this fsync inode to the list */
entry = kmem_cache_alloc(fsync_entry_slab, GFP_NOFS);
if (!entry) {
err = -ENOMEM;
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
goto unlock_out;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
entry->inode = f2fs_iget(sbi->sb, ino_of_node(page));
if (IS_ERR(entry->inode)) {
err = PTR_ERR(entry->inode);
f2fs: fix fsync_inode list addition logic and avoid invalid access to memory In function find_fsync_dnodes() - the fsync inodes gets added to the list, but in one path suppose f2fs_iget results in error, in such case - error gets added to the fsync inode list. In next call to recover_data()->get_fsync_inode() entry = list_entry(this, struct fsync_inode_entry, list); if (entry->inode->i_ino == ino) This can result in "invalid access to memory" when it encounters 'error' as entry in the fsync inode list. So, add the fsync inode entry to the list only in case of no errors. And, free the object at that point itself in case of issue. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-22 03:10:12 +00:00
kmem_cache_free(fsync_entry_slab, entry);
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
goto unlock_out;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: fix fsync_inode list addition logic and avoid invalid access to memory In function find_fsync_dnodes() - the fsync inodes gets added to the list, but in one path suppose f2fs_iget results in error, in such case - error gets added to the fsync inode list. In next call to recover_data()->get_fsync_inode() entry = list_entry(this, struct fsync_inode_entry, list); if (entry->inode->i_ino == ino) This can result in "invalid access to memory" when it encounters 'error' as entry in the fsync inode list. So, add the fsync inode entry to the list only in case of no errors. And, free the object at that point itself in case of issue. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-22 03:10:12 +00:00
list_add_tail(&entry->list, head);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
entry->blkaddr = blkaddr;
}
if (IS_INODE(page)) {
err = recover_inode(entry->inode, page);
f2fs: recover when journal contains deleted files When recovering a journal file with fsync data for files that have been deleted, don't bail out on recovery. Signed-off-by: Chris Fries <C.Fries@motorola.com> Reviewed-by: Russell Knize <rknize2@motorola.com> Reviewed-by: Jason Hrycay <jason.hrycay@motorola.com> [Jaegeuk Kim: fit the coding style] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-02 21:09:05 +00:00
if (err == -ENOENT) {
goto next;
} else if (err) {
err = -EINVAL;
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
goto unlock_out;
f2fs: recover when journal contains deleted files When recovering a journal file with fsync data for files that have been deleted, don't bail out on recovery. Signed-off-by: Chris Fries <C.Fries@motorola.com> Reviewed-by: Russell Knize <rknize2@motorola.com> Reviewed-by: Jason Hrycay <jason.hrycay@motorola.com> [Jaegeuk Kim: fit the coding style] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-05-02 21:09:05 +00:00
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
next:
/* check next segment */
blkaddr = next_blkaddr_of_node(page);
}
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
unlock_out:
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
unlock_page(page);
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
out:
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
__free_pages(page, 0);
return err;
}
static void destroy_fsync_dnodes(struct f2fs_sb_info *sbi,
struct list_head *head)
{
f2fs: use _safe() version of list_for_each This is calling list_del() inside a loop which is a problem when we try move to the next item on the list. I've converted it to use the _safe version. And also, as a cleanup, I've converted it to use list_for_each_entry instead of list_for_each. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-20 15:02:58 +00:00
struct fsync_inode_entry *entry, *tmp;
list_for_each_entry_safe(entry, tmp, head, list) {
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
iput(entry->inode);
list_del(&entry->list);
kmem_cache_free(fsync_entry_slab, entry);
}
}
static void check_index_in_prev_nodes(struct f2fs_sb_info *sbi,
block_t blkaddr)
{
struct seg_entry *sentry;
unsigned int segno = GET_SEGNO(sbi, blkaddr);
unsigned short blkoff = GET_SEGOFF_FROM_SEG0(sbi, blkaddr) &
(sbi->blocks_per_seg - 1);
struct f2fs_summary sum;
nid_t ino;
void *kaddr;
struct inode *inode;
struct page *node_page;
block_t bidx;
int i;
sentry = get_seg_entry(sbi, segno);
if (!f2fs_test_bit(blkoff, sentry->cur_valid_map))
return;
/* Get the previous summary */
for (i = CURSEG_WARM_DATA; i <= CURSEG_COLD_DATA; i++) {
struct curseg_info *curseg = CURSEG_I(sbi, i);
if (curseg->segno == segno) {
sum = curseg->sum_blk->entries[blkoff];
break;
}
}
if (i > CURSEG_COLD_DATA) {
struct page *sum_page = get_sum_page(sbi, segno);
struct f2fs_summary_block *sum_node;
kaddr = page_address(sum_page);
sum_node = (struct f2fs_summary_block *)kaddr;
sum = sum_node->entries[blkoff];
f2fs_put_page(sum_page, 1);
}
/* Get the node page */
node_page = get_node_page(sbi, le32_to_cpu(sum.nid));
bidx = start_bidx_of_node(ofs_of_node(node_page)) +
le16_to_cpu(sum.ofs_in_node);
ino = ino_of_node(node_page);
f2fs_put_page(node_page, 1);
/* Deallocate previous index in the node page */
f2fs: avoid balanc_fs during evict_inode 1. Background Previously, if f2fs tries to move data blocks of an *evicting* inode during the cleaning process, it stops the process incompletely and then restarts the whole process, since it needs a locked inode to grab victim data pages in its address space. In order to get a locked inode, iget_locked() by f2fs_iget() is normally used, but, it waits if the inode is on freeing. So, here is a deadlock scenario. 1. f2fs_evict_inode() <- inode "A" 2. f2fs_balance_fs() 3. f2fs_gc() 4. gc_data_segment() 5. f2fs_iget() <- inode "A" too! If step #1 and #5 treat a same inode "A", step #5 would fall into deadlock since the inode "A" is on freeing. In order to resolve this, f2fs_iget_nowait() which skips __wait_on_freeing_inode() was introduced in step #5, and stops f2fs_gc() to complete f2fs_evict_inode(). 1. f2fs_evict_inode() <- inode "A" 2. f2fs_balance_fs() 3. f2fs_gc() 4. gc_data_segment() 5. f2fs_iget_nowait() <- inode "A", then stop f2fs_gc() w/ -ENOENT 2. Problem and Solution In the above scenario, however, f2fs cannot finish f2fs_evict_inode() only if: o there are not enough free sections, and o f2fs_gc() tries to move data blocks of the *evicting* inode repeatedly. So, the final solution is to use f2fs_iget() and remove f2fs_balance_fs() in f2fs_evict_inode(). The f2fs_evict_inode() actually truncates all the data and node blocks, which means that it doesn't produce any dirty node pages accordingly. So, we don't need to do f2fs_balance_fs() in practical. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-31 06:36:04 +00:00
inode = f2fs_iget(sbi->sb, ino);
f2fs: handle error from f2fs_iget_nowait In case f2fs_iget_nowait returns error, it results in truncate_hole being called with 'error' value as inode pointer. There is no check in truncate_hole for valid inode, so it could result in crash due "invalid access to memory". Avoid this by handling error condition properly. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-22 03:09:43 +00:00
if (IS_ERR(inode))
return;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
truncate_hole(inode, bidx, bidx + 1);
iput(inode);
}
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode,
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
struct page *page, block_t blkaddr)
{
unsigned int start, end;
struct dnode_of_data dn;
struct f2fs_summary sum;
struct node_info ni;
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
int err = 0;
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 07:21:29 +00:00
int ilock;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
start = start_bidx_of_node(ofs_of_node(page));
if (IS_INODE(page))
end = start + ADDRS_PER_INODE;
else
end = start + ADDRS_PER_BLOCK;
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 07:21:29 +00:00
ilock = mutex_lock_op(sbi);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
set_new_dnode(&dn, inode, NULL, NULL, 0);
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 07:21:29 +00:00
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
err = get_dnode_of_data(&dn, start, ALLOC_NODE);
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 07:21:29 +00:00
if (err) {
mutex_unlock_op(sbi, ilock);
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
return err;
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 07:21:29 +00:00
}
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
wait_on_page_writeback(dn.node_page);
get_node_info(sbi, dn.nid, &ni);
BUG_ON(ni.ino != ino_of_node(page));
BUG_ON(ofs_of_node(dn.node_page) != ofs_of_node(page));
for (; start < end; start++) {
block_t src, dest;
src = datablock_addr(dn.node_page, dn.ofs_in_node);
dest = datablock_addr(page, dn.ofs_in_node);
if (src != dest && dest != NEW_ADDR && dest != NULL_ADDR) {
if (src == NULL_ADDR) {
int err = reserve_new_block(&dn);
/* We should not get -ENOSPC */
BUG_ON(err);
}
/* Check the previous node page having this index */
check_index_in_prev_nodes(sbi, dest);
set_summary(&sum, dn.nid, dn.ofs_in_node, ni.version);
/* write dummy data page */
recover_data_page(sbi, NULL, &sum, src, dest);
update_extent_cache(dest, &dn);
}
dn.ofs_in_node++;
}
/* write node page in place */
set_summary(&sum, dn.nid, 0, 0);
if (IS_INODE(dn.node_page))
sync_inode_page(&dn);
copy_node_footer(dn.node_page, page);
fill_node_footer(dn.node_page, dn.nid, ni.ino,
ofs_of_node(page), false);
set_page_dirty(dn.node_page);
recover_node_page(sbi, dn.node_page, &sum, &ni, blkaddr);
f2fs_put_dnode(&dn);
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 07:21:29 +00:00
mutex_unlock_op(sbi, ilock);
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
return 0;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
static int recover_data(struct f2fs_sb_info *sbi,
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
struct list_head *head, int type)
{
unsigned long long cp_ver = le64_to_cpu(sbi->ckpt->checkpoint_ver);
struct curseg_info *curseg;
struct page *page;
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
int err = 0;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
block_t blkaddr;
/* get node pages in the current segment */
curseg = CURSEG_I(sbi, type);
blkaddr = NEXT_FREE_BLKADDR(sbi, curseg);
/* read node page */
page = alloc_page(GFP_NOFS | __GFP_ZERO);
if (IS_ERR(page))
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
return -ENOMEM;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
lock_page(page);
while (1) {
struct fsync_inode_entry *entry;
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
err = f2fs_readpage(sbi, page, blkaddr, READ_SYNC);
if (err)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
goto out;
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
lock_page(page);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
if (cp_ver != cpver_of_node(page))
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
goto unlock_out;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
entry = get_fsync_inode(head, ino_of_node(page));
if (!entry)
goto next;
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
err = do_recover_data(sbi, entry->inode, page, blkaddr);
if (err)
goto out;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
if (entry->blkaddr == blkaddr) {
iput(entry->inode);
list_del(&entry->list);
kmem_cache_free(fsync_entry_slab, entry);
}
next:
/* check next segment */
blkaddr = next_blkaddr_of_node(page);
}
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
unlock_out:
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
unlock_page(page);
f2fs: reduce unncessary locking pages during read This patch reduces redundant locking and unlocking pages during read operations. In f2fs_readpage, let's use wait_on_page_locked() instead of lock_page. And then, when we need to modify any data finally, let's lock the page so that we can avoid lock contention. [readpage rule] - The f2fs_readpage returns unlocked page, or released page too in error cases. - Its caller should handle read error, -EIO, after locking the page, which indicates read completion. - Its caller should check PageUptodate after grab_cache_page. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-08 12:29:23 +00:00
out:
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
__free_pages(page, 0);
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
if (!err)
allocate_new_segments(sbi);
return err;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
int recover_fsync_data(struct f2fs_sb_info *sbi)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
{
struct list_head inode_list;
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
int err;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
fsync_entry_slab = f2fs_kmem_cache_create("f2fs_fsync_inode_entry",
sizeof(struct fsync_inode_entry), NULL);
if (unlikely(!fsync_entry_slab))
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
return -ENOMEM;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
INIT_LIST_HEAD(&inode_list);
/* step #1: find fsynced inode numbers */
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
err = find_fsync_dnodes(sbi, &inode_list);
if (err)
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
goto out;
if (list_empty(&inode_list))
goto out;
/* step #2: recover data */
sbi->por_doing = 1;
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
err = recover_data(sbi, &inode_list, CURSEG_WARM_NODE);
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
sbi->por_doing = 0;
BUG_ON(!list_empty(&inode_list));
out:
destroy_fsync_dnodes(sbi, &inode_list);
kmem_cache_destroy(fsync_entry_slab);
f2fs: clarify and enhance the f2fs_gc flow This patch makes clearer the ambiguous f2fs_gc flow as follows. 1. Remove intermediate checkpoint condition during f2fs_gc (i.e., should_do_checkpoint() and GC_BLOCKED) 2. Remove unnecessary return values of f2fs_gc because of #1. (i.e., GC_NODE, GC_OK, etc) 3. Simplify write_checkpoint() because of #2. 4. Clarify the main f2fs_gc flow. o monitor how many freed sections during one iteration of do_garbage_collect(). o do GC more without checkpoints if we can't get enough free sections. o do checkpoint once we've got enough free sections through forground GCs. 5. Adopt thread-logging (Slack-Space-Recycle) scheme more aggressively on data log types. See. get_ssr_segement() Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-02-04 06:11:17 +00:00
write_checkpoint(sbi, false);
f2fs: fix the recovery flow to handle errors correctly We should handle errors during the recovery flow correctly. For example, if we get -ENOMEM, we should report a mount failure instead of conducting the remained mount procedure. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-03-20 10:01:06 +00:00
return err;
f2fs: add recovery routines for roll-forward This adds roll-forward routines to recover fsynced data. - F2FS uses basically roll-back model with checkpointing. - In order to implement fsync(), there are two approaches as follows. 1. A roll-back model with checkpointing at every fsync() : This is a naive method, but suffers from very low performance. 2. A roll-forward model : F2FS adopts this model where all the fsynced data should be recovered, which were written after checkpointing was done. In order to figure out the data, F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains the location of next node block in each direct node block for reconstructing the chain of node blocks during the recovery. - In order to enhance the performance, F2FS keeps a "dentry" mark also in direct node blocks. If this is set during the recovery, F2FS replays adding a dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 08:13:32 +00:00
}