linux/net/mac80211/iface.c

256 lines
6.2 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
* Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "sta_info.h"
#include "debugfs_netdev.h"
#include "mesh.h"
/*
* Called when the netdev is removed or, by the code below, before
* the interface type changes.
*/
static void ieee80211_teardown_sdata(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct beacon_data *beacon;
struct sk_buff *skb;
int flushed;
int i;
/* free extra data */
ieee80211_free_keys(sdata);
ieee80211_debugfs_remove_netdev(sdata);
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
__skb_queue_purge(&sdata->fragments[i].skb_list);
sdata->fragment_next = 0;
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
beacon = sdata->u.ap.beacon;
rcu_assign_pointer(sdata->u.ap.beacon, NULL);
synchronize_rcu();
kfree(beacon);
while ((skb = skb_dequeue(&sdata->u.ap.ps_bc_buf))) {
local->total_ps_buffered--;
dev_kfree_skb(skb);
}
break;
case NL80211_IFTYPE_MESH_POINT:
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_rmc_free(sdata);
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
kfree(sdata->u.sta.extra_ie);
kfree(sdata->u.sta.assocreq_ies);
kfree(sdata->u.sta.assocresp_ies);
kfree_skb(sdata->u.sta.probe_resp);
break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MONITOR:
break;
case NL80211_IFTYPE_UNSPECIFIED:
case __NL80211_IFTYPE_AFTER_LAST:
BUG();
break;
}
flushed = sta_info_flush(local, sdata);
WARN_ON(flushed);
}
/*
* Helper function to initialise an interface to a specific type.
*/
static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
/* clear type-dependent union */
memset(&sdata->u, 0, sizeof(sdata->u));
/* and set some type-dependent values */
sdata->vif.type = type;
/* only monitor differs */
sdata->dev->type = ARPHRD_ETHER;
switch (type) {
case NL80211_IFTYPE_AP:
skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
INIT_LIST_HEAD(&sdata->u.ap.vlans);
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
ieee80211_sta_setup_sdata(sdata);
break;
case NL80211_IFTYPE_MESH_POINT:
if (ieee80211_vif_is_mesh(&sdata->vif))
ieee80211_mesh_init_sdata(sdata);
break;
case NL80211_IFTYPE_MONITOR:
sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
sdata->dev->hard_start_xmit = ieee80211_monitor_start_xmit;
sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
MONITOR_FLAG_OTHER_BSS;
break;
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_AP_VLAN:
break;
case NL80211_IFTYPE_UNSPECIFIED:
case __NL80211_IFTYPE_AFTER_LAST:
BUG();
break;
}
ieee80211_debugfs_add_netdev(sdata);
}
int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
ASSERT_RTNL();
if (type == sdata->vif.type)
return 0;
/*
* We could, here, on changes between IBSS/STA/MESH modes,
* invoke an MLME function instead that disassociates etc.
* and goes into the requested mode.
*/
if (netif_running(sdata->dev))
return -EBUSY;
/* Purge and reset type-dependent state. */
ieee80211_teardown_sdata(sdata->dev);
ieee80211_setup_sdata(sdata, type);
/* reset some values that shouldn't be kept across type changes */
sdata->bss_conf.basic_rates =
ieee80211_mandatory_rates(sdata->local,
sdata->local->hw.conf.channel->band);
sdata->drop_unencrypted = 0;
return 0;
}
int ieee80211_if_add(struct ieee80211_local *local, const char *name,
struct net_device **new_dev, enum nl80211_iftype type,
struct vif_params *params)
{
struct net_device *ndev;
struct ieee80211_sub_if_data *sdata = NULL;
int ret, i;
ASSERT_RTNL();
ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size,
name, ieee80211_if_setup);
if (!ndev)
return -ENOMEM;
ndev->needed_headroom = local->tx_headroom +
4*6 /* four MAC addresses */
+ 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
+ 6 /* mesh */
+ 8 /* rfc1042/bridge tunnel */
- ETH_HLEN /* ethernet hard_header_len */
+ IEEE80211_ENCRYPT_HEADROOM;
ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
ret = dev_alloc_name(ndev, ndev->name);
if (ret < 0)
goto fail;
memcpy(ndev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
sdata = netdev_priv(ndev);
ndev->ieee80211_ptr = &sdata->wdev;
/* initialise type-independent data */
sdata->wdev.wiphy = local->hw.wiphy;
sdata->local = local;
sdata->dev = ndev;
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
skb_queue_head_init(&sdata->fragments[i].skb_list);
INIT_LIST_HEAD(&sdata->key_list);
sdata->force_unicast_rateidx = -1;
sdata->max_ratectrl_rateidx = -1;
/* setup type-dependent data */
ieee80211_setup_sdata(sdata, type);
ret = register_netdevice(ndev);
if (ret)
goto fail;
ndev->uninit = ieee80211_teardown_sdata;
if (ieee80211_vif_is_mesh(&sdata->vif) &&
params && params->mesh_id_len)
ieee80211_sdata_set_mesh_id(sdata,
params->mesh_id_len,
params->mesh_id);
list_add_tail_rcu(&sdata->list, &local->interfaces);
if (new_dev)
*new_dev = ndev;
return 0;
fail:
free_netdev(ndev);
return ret;
}
void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
{
ASSERT_RTNL();
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 21:01:55 +00:00
list_del_rcu(&sdata->list);
synchronize_rcu();
unregister_netdevice(sdata->dev);
}
/*
* Remove all interfaces, may only be called at hardware unregistration
* time because it doesn't do RCU-safe list removals.
*/
void ieee80211_remove_interfaces(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata, *tmp;
ASSERT_RTNL();
list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
list_del(&sdata->list);
unregister_netdevice(sdata->dev);
}
}