diff --git a/blupload.py b/blupload.py
deleted file mode 100644
index 0c9a47b..0000000
--- a/blupload.py
+++ /dev/null
@@ -1,41 +0,0 @@
-import printcore,time,sys,os
-
-def dosify(name):
-    return os.path.split(name)[1].split(".")[0][:8]+".g"
-
-def blupload(printer,filename,path):
-    printer.send_now("M28 "+dosify(filename))
-    printer.startprint([i.replace("\n","") for i in open(path)])
-    try:
-        sys.stdout.write("Progress: 00.0%")
-        sys.stdout.flush()
-        while(printer.printing):
-            time.sleep(1)
-            sys.stdout.write("\b\b\b\b%02.1f%%" % (100*float(printer.queueindex)/len(printer.mainqueue),) )
-            sys.stdout.flush()
-        printer.send_now("M29 "+dosify(filename))
-        print "Done uploading, disconnecting with a 5 second timeout in case the printer has something important to say."
-        printer.disconnect()
-        time.sleep(5)
-        print "Upload complete. Goodbye!" 
-        
-    except:
-        print "Abort, disconnecting with a 5 second timeout in case the printer has something important to say."
-        printer.disconnect()
-
-if __name__ == '__main__':
-    #print "Usage: python blupload.py filename.gcode"
-    filename="../prusamendel/sellsx_export.gcode"
-    tfilename=filename
-    if len(sys.argv)>1:
-        filename=sys.argv[1]
-        tfilename=os.path.basename(sys.argv[1])
-        print "Uploading: "+filename," as "+dosify(tfilename)
-        p=printcore.printcore('/dev/ttyUSB0',115200)
-        p.loud=False
-        time.sleep(2)
-        blupload(p,tfilename,filename)
-        
-    else:
-        print "Usage: python blupload.py filename.gcode"
-
diff --git a/locale/fr/LC_MESSAGES/fr.po b/locale/fr/LC_MESSAGES/fr.po
index e003774..14926e7 100755
--- a/locale/fr/LC_MESSAGES/fr.po
+++ b/locale/fr/LC_MESSAGES/fr.po
@@ -5,339 +5,237 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: Pronterface jm1\n"
-"POT-Creation-Date: 2011-09-06 16:31+0100\n"
-"PO-Revision-Date: 2011-09-06 16:32+0100\n"
+"POT-Creation-Date: 2011-08-06 13:27+PDT\n"
+"PO-Revision-Date: 2011-11-16 16:53+0100\n"
 "Last-Translator: Cyril Laguilhon-Debat <c.laguilhon.debat@gmail.com>\n"
 "Language-Team: FR <c.laguilhon.debat@gmail.com>\n"
 "Language: \n"
 "MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=utf-8\n"
+"Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Generated-By: pygettext.py 1.5\n"
 
-#: pronterface.py:10
+#: pronterface.py:15
 msgid "WX is not installed. This program requires WX to run."
 msgstr "wxWidgets n'est pas installé. Ce programme nécessite la librairie wxWidgets pour fonctionner."
 
-#: pronterface.py:60
+#: pronterface.py:67
 msgid "Printer Interface"
 msgstr "Interface imprimante"
 
-#: pronterface.py:72
-msgid "X+100"
-msgstr ""
-
-#: pronterface.py:73
-msgid "X+10"
-msgstr ""
-
-#: pronterface.py:74
-msgid "X+1"
-msgstr ""
-
-#: pronterface.py:75
-msgid "X+0.1"
-msgstr ""
-
-#: pronterface.py:76
-msgid "HomeX"
-msgstr "Origine X"
-
-#: pronterface.py:77
-msgid "X-0.1"
-msgstr ""
-
-#: pronterface.py:78
-msgid "X-1"
-msgstr ""
-
-#: pronterface.py:79
-msgid "X-10"
-msgstr ""
-
 #: pronterface.py:80
-msgid "X-100"
-msgstr ""
-
-#: pronterface.py:81
-msgid "Y+100"
-msgstr ""
-
-#: pronterface.py:82
-msgid "Y+10"
-msgstr ""
-
-#: pronterface.py:83
-msgid "Y+1"
-msgstr ""
-
-#: pronterface.py:84
-msgid "Y+0.1"
-msgstr ""
-
-#: pronterface.py:85
-msgid "HomeY"
-msgstr "Origine Y"
-
-#: pronterface.py:86
-msgid "Y-0.1"
-msgstr ""
-
-#: pronterface.py:87
-msgid "Y-1"
-msgstr ""
-
-#: pronterface.py:88
-msgid "Y-10"
-msgstr ""
-
-#: pronterface.py:89
-msgid "Y-100"
-msgstr ""
-
-#: pronterface.py:90
 msgid "Motors off"
 msgstr "Arrêter les moteurs"
 
-#: pronterface.py:91
-msgid "Z+10"
-msgstr ""
-
-#: pronterface.py:92
-msgid "Z+1"
-msgstr ""
-
-#: pronterface.py:93
-msgid "Z+0.1"
-msgstr ""
-
-#: pronterface.py:94
-msgid "HomeZ"
-msgstr "Origine Z"
-
-#: pronterface.py:95
-msgid "Z-0.1"
-msgstr ""
-
-#: pronterface.py:96
-msgid "Z-1"
-msgstr ""
-
-#: pronterface.py:97
-msgid "Z-10"
-msgstr ""
-
-#: pronterface.py:98
-msgid "Home"
-msgstr "Origine"
-
-#: pronterface.py:99
+#: pronterface.py:81
 msgid "Check temp"
 msgstr "Lire les températures"
 
-#: pronterface.py:100
+#: pronterface.py:82
 msgid "Extrude"
 msgstr "Extruder"
 
-#: pronterface.py:101
+#: pronterface.py:83
 msgid "Reverse"
 msgstr "Inverser"
 
-#: pronterface.py:117
+#: pronterface.py:99
 msgid ""
 "# I moved all your custom buttons into .pronsolerc.\n"
 "# Please don't add them here any more.\n"
 "# Backup of your old buttons is in custombtn.old\n"
 msgstr ""
+"# I moved all your custom buttons into .pronsolerc.\n"
+"# Please don't add them here any more.\n"
+"# Backup of your old buttons is in custombtn.old\n"
 
-#: pronterface.py:122
+#: pronterface.py:104
 msgid "Note!!! You have specified custom buttons in both custombtn.txt and .pronsolerc"
 msgstr "Remarque! Vous avez spécifié des boutons personnalisés dans custombtn.txt et aussi dans .pronsolerc"
 
-#: pronterface.py:123
+#: pronterface.py:105
 msgid "Ignoring custombtn.txt. Remove all current buttons to revert to custombtn.txt"
 msgstr "Ignorant custombtn.txt. Retirez tous les boutons en cours pour revenir à custombtn.txt"
 
-#: pronterface.py:146
-#: pronterface.py:434
-#: pronterface.py:971
-#: pronterface.py:1020
-#: pronterface.py:1134
-#: pronterface.py:1161
-#: pronterface.py:1175
+#: pronterface.py:130
+#: pronterface.py:476
+#: pronterface.py:1228
+#: pronterface.py:1279
+#: pronterface.py:1396
+#: pronterface.py:1428
+#: pronterface.py:1443
 msgid "Print"
 msgstr "Imprimer"
 
-#: pronterface.py:150
-msgid "Printer is now online"
+#: pronterface.py:134
+msgid "Printer is now online."
 msgstr "L'imprimante est connectée"
 
-#: pronterface.py:199
+#: pronterface.py:188
 msgid "Setting hotend temperature to "
 msgstr "Réglage de la température de la buse à"
 
-#: pronterface.py:199
-#: pronterface.py:220
+#: pronterface.py:188
+#: pronterface.py:224
 msgid " degrees Celsius."
 msgstr " degrés Celsius."
 
-#: pronterface.py:203
-#: pronterface.py:224
+#: pronterface.py:207
+#: pronterface.py:242
 msgid "Printer is not online."
 msgstr "L'imprimante est déconnectée"
 
-#: pronterface.py:205
+#: pronterface.py:209
 msgid "You cannot set negative temperatures. To turn the hotend off entirely, set its temperature to 0."
 msgstr "Vous ne pouvez pas régler une température négative.Pour éteindre le chauffage de la buse, réglez sa température à 0°c."
 
-#: pronterface.py:207
-#: pronterface.py:228
-msgid "You must enter a temperature."
-msgstr "Vous devez saisir une température."
-
-#: pronterface.py:220
+#: pronterface.py:224
 msgid "Setting bed temperature to "
 msgstr "Réglage de la température du plateau à "
 
-#: pronterface.py:226
+#: pronterface.py:244
 msgid "You cannot set negative temperatures. To turn the bed off entirely, set its temperature to 0."
 msgstr "Vous ne pouvez pas régler une température négative. Pour désactiver votre plateau chauffant, réglez sa température à 0°c."
 
-#: pronterface.py:243
+#: pronterface.py:246
+msgid "You must enter a temperature."
+msgstr "Vous devez saisir une température."
+
+#: pronterface.py:261
 msgid "Do you want to erase the macro?"
 msgstr "Voulez-vous effacer la macro ?"
 
-#: pronterface.py:247
+#: pronterface.py:265
 msgid "Cancelled."
 msgstr "Annulé"
 
-#: pronterface.py:277
-msgid "&Open..."
-msgstr "&Ouvrir..."
-
-#: pronterface.py:277
+#: pronterface.py:295
 msgid " Opens file"
 msgstr " Ouvrir un fichier"
 
-#: pronterface.py:278
-msgid "&Edit..."
-msgstr "&Éditer..."
+#: pronterface.py:295
+msgid "&Open..."
+msgstr "&Ouvrir..."
 
-#: pronterface.py:278
+#: pronterface.py:296
 msgid " Edit open file"
 msgstr " Éditer le fichier ouvert"
 
-#: pronterface.py:279
-msgid "E&xit"
-msgstr "&Quitter"
+#: pronterface.py:296
+msgid "&Edit..."
+msgstr "&Éditer..."
 
-#: pronterface.py:279
-msgid " Closes the Window"
-msgstr " Quitter le programme"
-
-#: pronterface.py:280
-msgid "&File"
-msgstr "&Fichier"
-
-#: pronterface.py:284
-msgid "Clear console"
-msgstr "Effacer la console"
-
-#: pronterface.py:284
+#: pronterface.py:297
 msgid " Clear output console"
 msgstr "Effacer le contenu de la console de sortie"
 
-#: pronterface.py:285
+#: pronterface.py:297
+msgid "Clear console"
+msgstr "Effacer la console"
+
+#: pronterface.py:298
+msgid " Closes the Window"
+msgstr " Quitter le programme"
+
+#: pronterface.py:298
+msgid "E&xit"
+msgstr "&Quitter"
+
+#: pronterface.py:299
+msgid "&File"
+msgstr "&Fichier"
+
+#: pronterface.py:304
 msgid "&Macros"
 msgstr "&Macros"
 
-#: pronterface.py:286
+#: pronterface.py:305
 msgid "<&New...>"
 msgstr "<&Nouvelle...>"
 
-#: pronterface.py:287
-msgid "&Options"
-msgstr "&Options"
-
-#: pronterface.py:287
+#: pronterface.py:306
 msgid " Options dialog"
 msgstr " Fenêtre des options"
 
-#: pronterface.py:289
-msgid "SFACT Settings"
-msgstr "Paramètres &SFACT..."
+#: pronterface.py:306
+msgid "&Options"
+msgstr "&Options"
 
-#: pronterface.py:289
+#: pronterface.py:308
 msgid " Adjust SFACT settings"
 msgstr " Régler les paramètres SFACT"
 
-#: pronterface.py:292
-msgid "SFACT Quick Settings"
-msgstr "Réglages rapides SFACT"
+#: pronterface.py:308
+msgid "SFACT Settings"
+msgstr "Paramètres &SFACT..."
 
-#: pronterface.py:292
+#: pronterface.py:311
 msgid " Quickly adjust SFACT settings for active profile"
 msgstr " Réglages rapides des paramètres SFACT pour le profil actif."
 
-#: pronterface.py:295
+#: pronterface.py:311
+msgid "SFACT Quick Settings"
+msgstr "Réglages rapides SFACT"
+
+#: pronterface.py:315
 msgid "&Settings"
 msgstr "&Paramètres"
 
-#: pronterface.py:311
+#: pronterface.py:331
 msgid "Enter macro name"
 msgstr "Saisissez le nom de la macro"
 
-#: pronterface.py:314
+#: pronterface.py:334
 msgid "Macro name:"
 msgstr "Nom :"
 
-#: pronterface.py:317
+#: pronterface.py:337
 msgid "Ok"
 msgstr "Valider"
 
-#: pronterface.py:321
-#: pronterface.py:1197
+#: pronterface.py:341
+#: pronterface.py:1465
 msgid "Cancel"
 msgstr "Annuler"
 
-#: pronterface.py:339
-msgid "Name '"
-msgstr "Le nom '"
-
-#: pronterface.py:339
+#: pronterface.py:359
 msgid "' is being used by built-in command"
 msgstr "' est utilisé par des commandes internes."
 
-#: pronterface.py:342
+#: pronterface.py:359
+msgid "Name '"
+msgstr "Le nom '"
+
+#: pronterface.py:362
 msgid "Macro name may contain only alphanumeric symbols and underscores"
 msgstr "Un nom de macro ne peut contenir que des caractères alphanumérique et des underscore (_)"
 
-#: pronterface.py:375
-msgid "Port:"
+#: pronterface.py:411
+msgid "Port"
 msgstr "Port :"
 
-#: pronterface.py:397
+#: pronterface.py:430
 msgid "Connect"
 msgstr "Connecter"
 
-#: pronterface.py:399
+#: pronterface.py:432
 msgid "Connect to the printer"
 msgstr "Connecter l'imprimante"
 
-#: pronterface.py:401
+#: pronterface.py:434
 msgid "Disconnect"
 msgstr "Déconnecter"
 
-#: pronterface.py:405
+#: pronterface.py:438
 msgid "Reset"
 msgstr "Réinitialiser"
 
-#: pronterface.py:408
-#: pronterface.py:592
+#: pronterface.py:441
+#: pronterface.py:687
 msgid "Mini mode"
 msgstr "Mode réduit"
 
-#: pronterface.py:414
+#: pronterface.py:455
 msgid ""
 "Monitor\n"
 "printer"
@@ -345,181 +243,189 @@ msgstr ""
 "Surveiller\n"
 "l'imprimante"
 
-#: pronterface.py:423
+#: pronterface.py:465
 msgid "Load file"
 msgstr "Charger un fichier"
 
-#: pronterface.py:426
+#: pronterface.py:468
 msgid "SD Upload"
 msgstr "Copier sur SD"
 
-#: pronterface.py:430
+#: pronterface.py:472
 msgid "SD Print"
 msgstr "Imprimer depuis SD"
 
-#: pronterface.py:438
-#: pronterface.py:1021
-#: pronterface.py:1061
-#: pronterface.py:1109
-#: pronterface.py:1133
-#: pronterface.py:1160
-#: pronterface.py:1174
+#: pronterface.py:480
+#: pronterface.py:1280
+#: pronterface.py:1321
+#: pronterface.py:1370
+#: pronterface.py:1395
+#: pronterface.py:1427
+#: pronterface.py:1442
 msgid "Pause"
 msgstr "Pause"
 
-#: pronterface.py:458
+#: pronterface.py:494
 msgid "Send"
 msgstr "Envoyer"
 
-#: pronterface.py:460
-#: pronterface.py:518
+#: pronterface.py:502
+#: pronterface.py:603
 msgid "mm/min"
 msgstr "mm/min"
 
-#: pronterface.py:462
+#: pronterface.py:504
 msgid "XY:"
-msgstr ""
+msgstr "XY:"
 
-#: pronterface.py:464
+#: pronterface.py:506
 msgid "Z:"
-msgstr ""
+msgstr "Z:"
 
-#: pronterface.py:481
+#: pronterface.py:529
 msgid "Heater:"
 msgstr "Buse :"
 
-#: pronterface.py:489
-#: pronterface.py:501
+#: pronterface.py:532
+#: pronterface.py:552
+msgid "Off"
+msgstr "Off"
+
+#: pronterface.py:544
+#: pronterface.py:564
 msgid "Set"
 msgstr "Régler"
 
-#: pronterface.py:493
+#: pronterface.py:549
 msgid "Bed:"
 msgstr "Plateau :"
 
-#: pronterface.py:512
+#: pronterface.py:597
 msgid "mm"
 msgstr "mm"
 
-#: pronterface.py:551
-#: pronterface.py:846
-#: pronterface.py:1055
+#: pronterface.py:636
+#: pronterface.py:1099
+#: pronterface.py:1315
 msgid "Not connected to printer."
 msgstr "Imprimante non connectée"
 
-#: pronterface.py:599
+#: pronterface.py:694
 msgid "Full mode"
 msgstr "Mode complet"
 
-#: pronterface.py:637
+#: pronterface.py:719
+msgid "Execute command: "
+msgstr "Exécuter la commande :"
+
+#: pronterface.py:730
+msgid "click to add new custom button"
+msgstr "Ajouter un bouton personnalisé"
+
+#: pronterface.py:751
 msgid "Defines custom button. Usage: button <num> \"title\" [/c \"colour\"] command"
 msgstr "Définit des boutons personnalidés. Utilisation : <numero> \"Libelle\" [/c \"couleur\"] commande"
 
-#: pronterface.py:659
+#: pronterface.py:773
 msgid "Custom button number should be between 0 and 63"
 msgstr "Les numéros des boutons personnalisés doivent être compris entre 0 et 63."
 
-#: pronterface.py:749
-#, python-format
+#: pronterface.py:865
 msgid "Edit custom button '%s'"
 msgstr "Editer le bouton personnalisé n°'%s'"
 
-#: pronterface.py:751
+#: pronterface.py:867
 msgid "Move left <<"
 msgstr "Déplacer vers la gauche <<"
 
-#: pronterface.py:754
+#: pronterface.py:870
 msgid "Move right >>"
 msgstr "Déplacer vers la droite >>"
 
-#: pronterface.py:758
-#, python-format
+#: pronterface.py:874
 msgid "Remove custom button '%s'"
 msgstr "Supprimer le bouton personnalisé n°'%s'"
 
-#: pronterface.py:761
+#: pronterface.py:877
 msgid "Add custom button"
 msgstr "Ajouter un bouton personnalisé"
 
-#: pronterface.py:776
+#: pronterface.py:1022
 msgid "event object missing"
 msgstr "evennement d'objet manquant"
 
-#: pronterface.py:804
+#: pronterface.py:1050
 msgid "Invalid period given."
 msgstr "La période donnée est invalide"
 
-#: pronterface.py:807
+#: pronterface.py:1053
 msgid "Monitoring printer."
 msgstr "Surveillance de l'imprimante"
 
-#: pronterface.py:809
+#: pronterface.py:1055
 msgid "Done monitoring."
 msgstr "Surveillance de l'imprimante effectuée."
 
-#: pronterface.py:828
+#: pronterface.py:1077
 msgid "Printer is online. "
 msgstr "L'imprimante est connectée"
 
-#: pronterface.py:830
-#: pronterface.py:969
-#: pronterface.py:1019
+#: pronterface.py:1079
+#: pronterface.py:1226
+#: pronterface.py:1278
 msgid "Loaded "
 msgstr "Chargé "
 
-#: pronterface.py:833
-msgid "Hotend"
-msgstr "Buse"
-
-#: pronterface.py:833
+#: pronterface.py:1082
 msgid "Bed"
 msgstr "Plateau"
 
-#: pronterface.py:836
-#, python-format
+#: pronterface.py:1082
+msgid "Hotend"
+msgstr "Buse"
+
+#: pronterface.py:1089
 msgid " SD printing:%04.2f %%"
 msgstr "Impression SD : %04.2f %%"
 
-#: pronterface.py:838
-#, python-format
+#: pronterface.py:1091
 msgid " Printing:%04.2f %%"
 msgstr "Impression : %04.2f %%"
 
-#: pronterface.py:892
+#: pronterface.py:1149
 msgid "Opening file failed."
 msgstr "L'ouverture du fichier a échoué"
 
-#: pronterface.py:898
+#: pronterface.py:1155
 msgid "Starting print"
 msgstr "Début de l'impression..."
 
-#: pronterface.py:921
-msgid "Select the file to print"
-msgstr "Sélectionnez le fichier à imprimer :"
-
-#: pronterface.py:921
+#: pronterface.py:1178
 msgid "Pick SD file"
 msgstr "Choisir un fichier sur la carte SD"
 
-#: pronterface.py:949
+#: pronterface.py:1178
+msgid "Select the file to print"
+msgstr "Sélectionnez le fichier à imprimer :"
+
+#: pronterface.py:1206
 msgid "Skeinforge execution failed."
 msgstr "Exécution de Skeinforge échoué"
 
-#: pronterface.py:956
+#: pronterface.py:1213
 msgid "Skeining..."
 msgstr "Skeining..."
 
-#: pronterface.py:969
-#: pronterface.py:1019
-#, python-format
+#: pronterface.py:1226
+#: pronterface.py:1278
 msgid ", %d lines"
 msgstr ", %d lignes"
 
-#: pronterface.py:978
+#: pronterface.py:1235
 msgid "Skeining "
 msgstr "Skeining "
 
-#: pronterface.py:980
+#: pronterface.py:1237
 msgid ""
 "Skeinforge not found. \n"
 "Please copy Skeinforge into a directory named \"skeinforge\" in the same directory as this file."
@@ -527,116 +433,140 @@ msgstr ""
 "Skeinforge non trouvé. \n"
 "Veuillez copier Skeinforge dans un répertoire nommé \"skeinforge\" placé dans le repertoire du programme."
 
-#: pronterface.py:999
+#: pronterface.py:1256
 msgid "Open file to print"
 msgstr "Ouvrir un fichier à imprimer"
 
-#: pronterface.py:1000
-msgid "STL and GCODE files (;*.gcode;*.g;*.stl;*.STL;)"
-msgstr "Fichiers STL et GCODE (;*.gcode;*.g;*.stl;*.STL;)"
+#: pronterface.py:1257
+msgid "OBJ, STL, and GCODE files (;*.gcode;*.gco;*.g;*.stl;*.STL;*.obj;*.OBJ;)"
+msgstr "Fichiers OBJ, STL et GCODE (;*.gcode;*.gco;*.g;*.stl;*.STL;*.obj;*.OBJ;)"
 
-#: pronterface.py:1007
+#: pronterface.py:1264
 msgid "File not found!"
 msgstr "Fichier non trouvé"
 
-#: pronterface.py:1029
+#: pronterface.py:1288
 msgid "mm of filament used in this print\n"
 msgstr "mm de filament utilisés pour cette impression\n"
 
-#: pronterface.py:1030
-#: pronterface.py:1031
-#: pronterface.py:1032
-msgid "the print goes from"
-msgstr ""
-
-#: pronterface.py:1030
-#: pronterface.py:1031
-#: pronterface.py:1032
-msgid "mm to"
-msgstr "mm à"
-
-#: pronterface.py:1030
+#: pronterface.py:1289
 msgid ""
 "mm in X\n"
 "and is"
 msgstr ""
+"mm en X\n"
+"et mesure"
 
-#: pronterface.py:1030
-#: pronterface.py:1031
+#: pronterface.py:1289
+#: pronterface.py:1290
 msgid "mm wide\n"
-msgstr ""
+msgstr "mm de large\n"
 
-#: pronterface.py:1031
+#: pronterface.py:1289
+#: pronterface.py:1290
+#: pronterface.py:1291
+msgid "mm to"
+msgstr "mm à"
+
+#: pronterface.py:1289
+#: pronterface.py:1290
+#: pronterface.py:1291
+msgid "the print goes from"
+msgstr "L'impression va de"
+
+#: pronterface.py:1290
 msgid ""
 "mm in Y\n"
 "and is"
 msgstr ""
+"mm en Y\n"
+"et mesure"
 
-#: pronterface.py:1032
+#: pronterface.py:1291
+msgid "mm high\n"
+msgstr "mm de haut\n"
+
+#: pronterface.py:1291
 msgid ""
 "mm in Z\n"
 "and is"
 msgstr ""
+"mm en Z\n"
+"et mesure"
 
-#: pronterface.py:1032
-msgid "mm high\n"
-msgstr ""
+#: pronterface.py:1292
+msgid "Estimated duration (pessimistic): "
+msgstr "Durée estimée (pessimiste)"
 
-#: pronterface.py:1052
+#: pronterface.py:1312
 msgid "No file loaded. Please use load first."
 msgstr "Aucun fichier chargé. Veuillez charger un fichier avant."
 
-#: pronterface.py:1063
+#: pronterface.py:1323
 msgid "Restart"
 msgstr "Recommencer"
 
-#: pronterface.py:1067
+#: pronterface.py:1327
 msgid "File upload complete"
 msgstr "Envoi du fichier terminé"
 
-#: pronterface.py:1086
+#: pronterface.py:1346
 msgid "Pick SD filename"
 msgstr "Lister les fichiers sur la carte SD"
 
-#: pronterface.py:1102
+#: pronterface.py:1353
+msgid "Paused."
+msgstr "En pause"
+
+#: pronterface.py:1363
 msgid "Resume"
 msgstr "Reprendre"
 
-#: pronterface.py:1168
+#: pronterface.py:1379
+msgid "Connecting..."
+msgstr "Connection en cours..."
+
+#: pronterface.py:1410
+msgid "Disconnected."
+msgstr "Déconnecté"
+
+#: pronterface.py:1435
+msgid "Reset."
+msgstr "Réinitialiser"
+
+#: pronterface.py:1436
 msgid "Are you sure you want to reset the printer?"
 msgstr "Etes-vous sûr de vouloir réinitialiser l'imprimante?"
 
-#: pronterface.py:1168
+#: pronterface.py:1436
 msgid "Reset?"
 msgstr "Réinitialiser ?"
 
-#: pronterface.py:1193
+#: pronterface.py:1461
 msgid "Save"
 msgstr "Enregistrer"
 
-#: pronterface.py:1248
+#: pronterface.py:1519
 msgid "Edit settings"
 msgstr "Modifier les paramètres"
 
-#: pronterface.py:1250
+#: pronterface.py:1521
 msgid "Defaults"
 msgstr "Paramètres par défaut"
 
-#: pronterface.py:1272
+#: pronterface.py:1543
 msgid "Custom button"
 msgstr "Commande personnalisée"
 
-#: pronterface.py:1280
+#: pronterface.py:1551
 msgid "Button title"
 msgstr "Titre du bouton"
 
-#: pronterface.py:1283
+#: pronterface.py:1554
 msgid "Command"
 msgstr "Commande"
 
-#: pronterface.py:1292
+#: pronterface.py:1563
 msgid "Color"
 msgstr "Couleur"
 
-#~ msgid "&Print"
-#~ msgstr "&Imprimer"
diff --git a/locale/fr/LC_MESSAGES/pronterface.mo b/locale/fr/LC_MESSAGES/pronterface.mo
index 62e3cb1..ffc7689 100644
Binary files a/locale/fr/LC_MESSAGES/pronterface.mo and b/locale/fr/LC_MESSAGES/pronterface.mo differ
diff --git a/locale/pronterface.pot b/locale/pronterface.pot
index fa4f0cc..7e07737 100644
--- a/locale/pronterface.pot
+++ b/locale/pronterface.pot
@@ -15,542 +15,523 @@ msgstr ""
 "Generated-By: pygettext.py 1.5\n"
 
 
-#: pronterface.py:10
+#: pronterface.py:15
 msgid "WX is not installed. This program requires WX to run."
 msgstr ""
 
-#: pronterface.py:55
+#: pronterface.py:67
 msgid "Printer Interface"
 msgstr ""
 
-#: pronterface.py:67
-msgid "X+100"
-msgstr ""
-
-#: pronterface.py:68
-msgid "X+10"
-msgstr ""
-
-#: pronterface.py:69
-msgid "X+1"
-msgstr ""
-
-#: pronterface.py:70
-msgid "X+0.1"
-msgstr ""
-
-#: pronterface.py:71
-msgid "HomeX"
-msgstr ""
-
-#: pronterface.py:72
-msgid "X-0.1"
-msgstr ""
-
-#: pronterface.py:73
-msgid "X-1"
-msgstr ""
-
-#: pronterface.py:74
-msgid "X-10"
-msgstr ""
-
-#: pronterface.py:75
-msgid "X-100"
-msgstr ""
-
-#: pronterface.py:76
-msgid "Y+100"
-msgstr ""
-
-#: pronterface.py:77
-msgid "Y+10"
-msgstr ""
-
-#: pronterface.py:78
-msgid "Y+1"
-msgstr ""
-
-#: pronterface.py:79
-msgid "Y+0.1"
-msgstr ""
-
 #: pronterface.py:80
-msgid "HomeY"
-msgstr ""
-
-#: pronterface.py:81
-msgid "Y-0.1"
-msgstr ""
-
-#: pronterface.py:82
-msgid "Y-1"
-msgstr ""
-
-#: pronterface.py:83
-msgid "Y-10"
-msgstr ""
-
-#: pronterface.py:84
-msgid "Y-100"
-msgstr ""
-
-#: pronterface.py:85
 msgid "Motors off"
 msgstr ""
 
-#: pronterface.py:86
-msgid "Z+10"
-msgstr ""
-
-#: pronterface.py:87
-msgid "Z+1"
-msgstr ""
-
-#: pronterface.py:88
-msgid "Z+0.1"
-msgstr ""
-
-#: pronterface.py:89
-msgid "HomeZ"
-msgstr ""
-
-#: pronterface.py:90
-msgid "Z-0.1"
-msgstr ""
-
-#: pronterface.py:91
-msgid "Z-1"
-msgstr ""
-
-#: pronterface.py:92
-msgid "Z-10"
-msgstr ""
-
-#: pronterface.py:93
-msgid "Home"
-msgstr ""
-
-#: pronterface.py:94
+#: pronterface.py:81
 msgid "Check temp"
 msgstr ""
 
-#: pronterface.py:95
+#: pronterface.py:82
 msgid "Extrude"
 msgstr ""
 
-#: pronterface.py:96
+#: pronterface.py:83
 msgid "Reverse"
 msgstr ""
 
-#: pronterface.py:112
+#: pronterface.py:99
 msgid ""
 "# I moved all your custom buttons into .pronsolerc.\n"
 "# Please don't add them here any more.\n"
 "# Backup of your old buttons is in custombtn.old\n"
 msgstr ""
 
-#: pronterface.py:117
+#: pronterface.py:104
 msgid "Note!!! You have specified custom buttons in both custombtn.txt and .pronsolerc"
 msgstr ""
 
-#: pronterface.py:118
+#: pronterface.py:105
 msgid "Ignoring custombtn.txt. Remove all current buttons to revert to custombtn.txt"
 msgstr ""
 
-#: pronterface.py:141 pronterface.py:427 pronterface.py:956
-#: pronterface.py:1003 pronterface.py:1113 pronterface.py:1140
-#: pronterface.py:1154
+#: pronterface.py:130 pronterface.py:476 pronterface.py:1228
+#: pronterface.py:1279 pronterface.py:1396 pronterface.py:1428
+#: pronterface.py:1443
 msgid "Print"
 msgstr ""
 
-#: pronterface.py:145
-msgid "Printer is now online"
+#: pronterface.py:134
+msgid "Printer is now online."
 msgstr ""
 
-#: pronterface.py:194
+#: pronterface.py:188
 msgid "Setting hotend temperature to "
 msgstr ""
 
-#: pronterface.py:194 pronterface.py:215
+#: pronterface.py:188 pronterface.py:224
 msgid " degrees Celsius."
 msgstr ""
 
-#: pronterface.py:198 pronterface.py:219
+#: pronterface.py:207 pronterface.py:242
 msgid "Printer is not online."
 msgstr ""
 
-#: pronterface.py:200
+#: pronterface.py:209
 msgid "You cannot set negative temperatures. To turn the hotend off entirely, set its temperature to 0."
 msgstr ""
 
-#: pronterface.py:202 pronterface.py:223
-msgid "You must enter a temperature."
-msgstr ""
-
-#: pronterface.py:215
+#: pronterface.py:224
 msgid "Setting bed temperature to "
 msgstr ""
 
-#: pronterface.py:221
+#: pronterface.py:244
 msgid "You cannot set negative temperatures. To turn the bed off entirely, set its temperature to 0."
 msgstr ""
 
-#: pronterface.py:238
+#: pronterface.py:246
+msgid "You must enter a temperature."
+msgstr ""
+
+#: pronterface.py:261
 msgid "Do you want to erase the macro?"
 msgstr ""
 
-#: pronterface.py:242
+#: pronterface.py:265
 msgid "Cancelled."
 msgstr ""
 
-#: pronterface.py:271
+#: pronterface.py:295
 msgid " Opens file"
 msgstr ""
 
-#: pronterface.py:271
+#: pronterface.py:295
 msgid "&Open..."
 msgstr ""
 
-#: pronterface.py:272
+#: pronterface.py:296
 msgid " Edit open file"
 msgstr ""
 
-#: pronterface.py:272
+#: pronterface.py:296
 msgid "&Edit..."
 msgstr ""
 
-#: pronterface.py:274
-msgid " Adjust SFACT settings"
+#: pronterface.py:297
+msgid " Clear output console"
 msgstr ""
 
-#: pronterface.py:274
-msgid "SFACT Settings"
+#: pronterface.py:297
+msgid "Clear console"
 msgstr ""
 
-#: pronterface.py:277
-msgid " Quickly adjust SFACT settings for active profile"
-msgstr ""
-
-#: pronterface.py:277
-msgid "SFACT Quick Settings"
-msgstr ""
-
-#: pronterface.py:281
+#: pronterface.py:298
 msgid " Closes the Window"
 msgstr ""
 
-#: pronterface.py:281
+#: pronterface.py:298
 msgid "E&xit"
 msgstr ""
 
-#: pronterface.py:282
-msgid "&Print"
-msgstr ""
-
-#: pronterface.py:285
-msgid "&Macros"
-msgstr ""
-
-#: pronterface.py:286
-msgid "<&New...>"
-msgstr ""
-
-#: pronterface.py:287
-msgid " Options dialog"
-msgstr ""
-
-#: pronterface.py:287
-msgid "&Options"
-msgstr ""
-
-#: pronterface.py:288
-msgid "&Settings"
+#: pronterface.py:299
+msgid "&File"
 msgstr ""
 
 #: pronterface.py:304
+msgid "&Macros"
+msgstr ""
+
+#: pronterface.py:305
+msgid "<&New...>"
+msgstr ""
+
+#: pronterface.py:306
+msgid " Options dialog"
+msgstr ""
+
+#: pronterface.py:306
+msgid "&Options"
+msgstr ""
+
+#: pronterface.py:308
+msgid " Adjust SFACT settings"
+msgstr ""
+
+#: pronterface.py:308
+msgid "SFACT Settings"
+msgstr ""
+
+#: pronterface.py:311
+msgid " Quickly adjust SFACT settings for active profile"
+msgstr ""
+
+#: pronterface.py:311
+msgid "SFACT Quick Settings"
+msgstr ""
+
+#: pronterface.py:315
+msgid "&Settings"
+msgstr ""
+
+#: pronterface.py:331
 msgid "Enter macro name"
 msgstr ""
 
-#: pronterface.py:307
+#: pronterface.py:334
 msgid "Macro name:"
 msgstr ""
 
-#: pronterface.py:310
+#: pronterface.py:337
 msgid "Ok"
 msgstr ""
 
-#: pronterface.py:314
+#: pronterface.py:341 pronterface.py:1465
 msgid "Cancel"
 msgstr ""
 
-#: pronterface.py:332
+#: pronterface.py:359
 msgid "' is being used by built-in command"
 msgstr ""
 
-#: pronterface.py:332
+#: pronterface.py:359
 msgid "Name '"
 msgstr ""
 
-#: pronterface.py:368
-msgid "Port:"
+#: pronterface.py:362
+msgid "Macro name may contain only alphanumeric symbols and underscores"
 msgstr ""
 
-#: pronterface.py:390
+#: pronterface.py:411
+msgid "Port"
+msgstr ""
+
+#: pronterface.py:430
 msgid "Connect"
 msgstr ""
 
-#: pronterface.py:392
+#: pronterface.py:432
 msgid "Connect to the printer"
 msgstr ""
 
-#: pronterface.py:394
+#: pronterface.py:434
 msgid "Disconnect"
 msgstr ""
 
-#: pronterface.py:398
+#: pronterface.py:438
 msgid "Reset"
 msgstr ""
 
-#: pronterface.py:401 pronterface.py:579
+#: pronterface.py:441 pronterface.py:687
 msgid "Mini mode"
 msgstr ""
 
-#: pronterface.py:407
+#: pronterface.py:455
 msgid ""
 "Monitor\n"
 "printer"
 msgstr ""
 
-#: pronterface.py:416
+#: pronterface.py:465
 msgid "Load file"
 msgstr ""
 
-#: pronterface.py:419
+#: pronterface.py:468
 msgid "SD Upload"
 msgstr ""
 
-#: pronterface.py:423
+#: pronterface.py:472
 msgid "SD Print"
 msgstr ""
 
-#: pronterface.py:431 pronterface.py:1004 pronterface.py:1040
-#: pronterface.py:1088 pronterface.py:1112 pronterface.py:1139
-#: pronterface.py:1153
+#: pronterface.py:480 pronterface.py:1280 pronterface.py:1321
+#: pronterface.py:1370 pronterface.py:1395 pronterface.py:1427
+#: pronterface.py:1442
 msgid "Pause"
 msgstr ""
 
-#: pronterface.py:445
+#: pronterface.py:494
 msgid "Send"
 msgstr ""
 
-#: pronterface.py:453 pronterface.py:511
+#: pronterface.py:502 pronterface.py:603
 msgid "mm/min"
 msgstr ""
 
-#: pronterface.py:455
+#: pronterface.py:504
 msgid "XY:"
 msgstr ""
 
-#: pronterface.py:457
+#: pronterface.py:506
 msgid "Z:"
 msgstr ""
 
-#: pronterface.py:474
+#: pronterface.py:529
 msgid "Heater:"
 msgstr ""
 
-#: pronterface.py:482 pronterface.py:494
+#: pronterface.py:532 pronterface.py:552
+msgid "Off"
+msgstr ""
+
+#: pronterface.py:544 pronterface.py:564
 msgid "Set"
 msgstr ""
 
-#: pronterface.py:486
+#: pronterface.py:549
 msgid "Bed:"
 msgstr ""
 
-#: pronterface.py:505
+#: pronterface.py:597
 msgid "mm"
 msgstr ""
 
-#: pronterface.py:538 pronterface.py:833 pronterface.py:1034
+#: pronterface.py:636 pronterface.py:1099 pronterface.py:1315
 msgid "Not connected to printer."
 msgstr ""
 
-#: pronterface.py:586
+#: pronterface.py:694
 msgid "Full mode"
 msgstr ""
 
-#: pronterface.py:624
+#: pronterface.py:719
+msgid "Execute command: "
+msgstr ""
+
+#: pronterface.py:730
+msgid "click to add new custom button"
+msgstr ""
+
+#: pronterface.py:751
 msgid "Defines custom button. Usage: button <num> \"title\" [/c \"colour\"] command"
 msgstr ""
 
-#: pronterface.py:646
+#: pronterface.py:773
 msgid "Custom button number should be between 0 and 63"
 msgstr ""
 
-#: pronterface.py:736
+#: pronterface.py:865
 msgid "Edit custom button '%s'"
 msgstr ""
 
-#: pronterface.py:738
+#: pronterface.py:867
 msgid "Move left <<"
 msgstr ""
 
-#: pronterface.py:741
+#: pronterface.py:870
 msgid "Move right >>"
 msgstr ""
 
-#: pronterface.py:745
+#: pronterface.py:874
 msgid "Remove custom button '%s'"
 msgstr ""
 
-#: pronterface.py:748
+#: pronterface.py:877
 msgid "Add custom button"
 msgstr ""
 
-#: pronterface.py:763
+#: pronterface.py:1022
 msgid "event object missing"
 msgstr ""
 
-#: pronterface.py:791
+#: pronterface.py:1050
 msgid "Invalid period given."
 msgstr ""
 
-#: pronterface.py:794
+#: pronterface.py:1053
 msgid "Monitoring printer."
 msgstr ""
 
-#: pronterface.py:796
+#: pronterface.py:1055
 msgid "Done monitoring."
 msgstr ""
 
-#: pronterface.py:815
+#: pronterface.py:1077
 msgid "Printer is online. "
 msgstr ""
 
-#: pronterface.py:817 pronterface.py:954 pronterface.py:1002
+#: pronterface.py:1079 pronterface.py:1226 pronterface.py:1278
 msgid "Loaded "
 msgstr ""
 
-#: pronterface.py:820
+#: pronterface.py:1082
 msgid "Bed"
 msgstr ""
 
-#: pronterface.py:820
+#: pronterface.py:1082
 msgid "Hotend"
 msgstr ""
 
-#: pronterface.py:823
+#: pronterface.py:1089
 msgid " SD printing:%04.2f %%"
 msgstr ""
 
-#: pronterface.py:825
+#: pronterface.py:1091
 msgid " Printing:%04.2f %%"
 msgstr ""
 
-#: pronterface.py:879
+#: pronterface.py:1149
 msgid "Opening file failed."
 msgstr ""
 
-#: pronterface.py:885
+#: pronterface.py:1155
 msgid "Starting print"
 msgstr ""
 
-#: pronterface.py:908
+#: pronterface.py:1178
 msgid "Pick SD file"
 msgstr ""
 
-#: pronterface.py:908
+#: pronterface.py:1178
 msgid "Select the file to print"
 msgstr ""
 
-#: pronterface.py:936
+#: pronterface.py:1206
 msgid "Skeinforge execution failed."
 msgstr ""
 
-#: pronterface.py:943
+#: pronterface.py:1213
 msgid "Skeining..."
 msgstr ""
 
-#: pronterface.py:954 pronterface.py:1002
+#: pronterface.py:1226 pronterface.py:1278
 msgid ", %d lines"
 msgstr ""
 
-#: pronterface.py:963
+#: pronterface.py:1235
 msgid "Skeining "
 msgstr ""
 
-#: pronterface.py:965
+#: pronterface.py:1237
 msgid ""
 "Skeinforge not found. \n"
 "Please copy Skeinforge into a directory named \"skeinforge\" in the same directory as this file."
 msgstr ""
 
-#: pronterface.py:984
+#: pronterface.py:1256
 msgid "Open file to print"
 msgstr ""
 
-#: pronterface.py:985
-msgid "STL and GCODE files (;*.gcode;*.g;*.stl;*.STL;)"
+#: pronterface.py:1257
+msgid "OBJ, STL, and GCODE files (;*.gcode;*.gco;*.g;*.stl;*.STL;*.obj;*.OBJ;)"
 msgstr ""
 
-#: pronterface.py:992
+#: pronterface.py:1264
 msgid "File not found!"
 msgstr ""
 
-#: pronterface.py:1011
-msgid "mm of filament used in this print"
+#: pronterface.py:1288
+msgid ""
+"mm of filament used in this print\n"
 msgstr ""
 
-#: pronterface.py:1031
+#: pronterface.py:1289
+msgid ""
+"mm in X\n"
+"and is"
+msgstr ""
+
+#: pronterface.py:1289 pronterface.py:1290
+msgid ""
+"mm wide\n"
+msgstr ""
+
+#: pronterface.py:1289 pronterface.py:1290 pronterface.py:1291
+msgid "mm to"
+msgstr ""
+
+#: pronterface.py:1289 pronterface.py:1290 pronterface.py:1291
+msgid "the print goes from"
+msgstr ""
+
+#: pronterface.py:1290
+msgid ""
+"mm in Y\n"
+"and is"
+msgstr ""
+
+#: pronterface.py:1291
+msgid ""
+"mm high\n"
+msgstr ""
+
+#: pronterface.py:1291
+msgid ""
+"mm in Z\n"
+"and is"
+msgstr ""
+
+#: pronterface.py:1292
+msgid "Estimated duration (pessimistic): "
+msgstr ""
+
+#: pronterface.py:1312
 msgid "No file loaded. Please use load first."
 msgstr ""
 
-#: pronterface.py:1042
+#: pronterface.py:1323
 msgid "Restart"
 msgstr ""
 
-#: pronterface.py:1046
+#: pronterface.py:1327
 msgid "File upload complete"
 msgstr ""
 
-#: pronterface.py:1065
+#: pronterface.py:1346
 msgid "Pick SD filename"
 msgstr ""
 
-#: pronterface.py:1081
+#: pronterface.py:1353
+msgid "Paused."
+msgstr ""
+
+#: pronterface.py:1363
 msgid "Resume"
 msgstr ""
 
-#: pronterface.py:1147
+#: pronterface.py:1379
+msgid "Connecting..."
+msgstr ""
+
+#: pronterface.py:1410
+msgid "Disconnected."
+msgstr ""
+
+#: pronterface.py:1435
+msgid "Reset."
+msgstr ""
+
+#: pronterface.py:1436
 msgid "Are you sure you want to reset the printer?"
 msgstr ""
 
-#: pronterface.py:1147
+#: pronterface.py:1436
 msgid "Reset?"
 msgstr ""
 
-#: pronterface.py:1226
+#: pronterface.py:1461
+msgid "Save"
+msgstr ""
+
+#: pronterface.py:1519
 msgid "Edit settings"
 msgstr ""
 
-#: pronterface.py:1228
+#: pronterface.py:1521
 msgid "Defaults"
 msgstr ""
 
-#: pronterface.py:1250
+#: pronterface.py:1543
 msgid "Custom button"
 msgstr ""
 
-#: pronterface.py:1258
+#: pronterface.py:1551
 msgid "Button title"
 msgstr ""
 
-#: pronterface.py:1261
+#: pronterface.py:1554
 msgid "Command"
 msgstr ""
 
-#: pronterface.py:1270
+#: pronterface.py:1563
 msgid "Color"
 msgstr ""
 
diff --git a/pronsole.py b/pronsole.py
index 78e274b..fd3be45 100755
--- a/pronsole.py
+++ b/pronsole.py
@@ -147,9 +147,9 @@ class Settings:
         self.port = ""
         self.baudrate = 115200
         self.temperature_pla = 185
-        self.temperature_abs = 230.0
-        self.bedtemp_pla = 60.0
-        self.bedtemp_abs = 110.0
+        self.temperature_abs = 230
+        self.bedtemp_pla = 60
+        self.bedtemp_abs = 110
         self.xy_feedrate = 3000
         self.z_feedrate = 200
         self.e_feedrate = 300
diff --git a/pronterface.py b/pronterface.py
index 78a8165..fcff0dd 100755
--- a/pronterface.py
+++ b/pronterface.py
@@ -117,6 +117,8 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         self.starttime=0
         self.curlayer=0
         self.cur_button=None
+        self.hsetpoint=0.0
+        self.bsetpoint=0.0
     
     def startcb(self):
         self.starttime=time.time()
@@ -184,14 +186,29 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
                 if self.p.online:
                     self.p.send_now("M104 S"+l)
                     print _("Setting hotend temperature to "),f,_(" degrees Celsius.")
-                    self.htemp.SetValue(l)
-                    self.set("last_temperature",str(f))
+                    self.hsetpoint=f
+                    #self.tgauge.SetTarget(int(f))
+                    if f>0: 
+                        self.htemp.SetValue(l)
+                        self.set("last_temperature",str(f))
+                        self.settoff.SetBackgroundColour("")
+                        self.settoff.SetForegroundColour("")
+                        self.settbtn.SetBackgroundColour("#FFAA66")
+                        self.settbtn.SetForegroundColour("#660000")
+                        self.htemp.SetBackgroundColour("#FFDABB")
+                    else:
+                        self.settoff.SetBackgroundColour("#0044CC")
+                        self.settoff.SetForegroundColour("white")
+                        self.settbtn.SetBackgroundColour("")
+                        self.settbtn.SetForegroundColour("")
+                        self.htemp.SetBackgroundColour("white")
+                        self.htemp.Refresh()
                 else:
                     print _("Printer is not online.")
             else:
                 print _("You cannot set negative temperatures. To turn the hotend off entirely, set its temperature to 0.")
-        except:
-            print _("You must enter a temperature.")
+        except Exception,x:
+            print _("You must enter a temperature. (%s)" % (repr(x),))
     
     def do_bedtemp(self,l=""):
         try:
@@ -205,8 +222,22 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
                 if self.p.online:
                     self.p.send_now("M140 S"+l)
                     print _("Setting bed temperature to "),f,_(" degrees Celsius.")
-                    self.btemp.SetValue(l)
-                    self.set("last_bed_temperature",str(f))
+                    self.bsetpoint=f
+                    if f>0: 
+                        self.btemp.SetValue(l)
+                        self.set("last_bed_temperature",str(f))
+                        self.setboff.SetBackgroundColour("")
+                        self.setboff.SetForegroundColour("")
+                        self.setbbtn.SetBackgroundColour("#FFAA66")
+                        self.setbbtn.SetForegroundColour("#660000")
+                        self.btemp.SetBackgroundColour("#FFDABB")
+                    else:
+                        self.setboff.SetBackgroundColour("#0044CC")
+                        self.setboff.SetForegroundColour("white")
+                        self.setbbtn.SetBackgroundColour("")
+                        self.setbbtn.SetForegroundColour("")
+                        self.btemp.SetBackgroundColour("white")
+                        self.btemp.Refresh()
                 else:
                     print _("Printer is not online.")
             else:
@@ -409,6 +440,14 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         uts.Add(self.resetbtn)
         self.minibtn=wx.Button(self.panel,-1,_("Mini mode"),pos=(690,0))
         self.minibtn.Bind(wx.EVT_BUTTON,self.toggleview)
+        #self.tgauge=TempGauge(self.panel,size=(300,24))
+        #def scroll_setpoint(e):
+        #   if e.GetWheelRotation()>0:
+        #       self.do_settemp(str(self.hsetpoint+1))
+        #   elif e.GetWheelRotation()<0:
+        #       self.do_settemp(str(max(0,self.hsetpoint-1)))
+        #self.tgauge.Bind(wx.EVT_MOUSEWHEEL,scroll_setpoint)
+        
         uts.Add((10,-1))
         self.monitorbox=wx.CheckBox(self.panel,-1,"",pos=(450,37))
         uts.Add((15,-1))
@@ -418,6 +457,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         
         uts.Add((15,-1),flag=wx.EXPAND)
         uts.Add(self.minibtn)
+        #uts.Add(self.tgauge)
         
         #SECOND ROW
         ubs=self.upperbottomsizer=wx.BoxSizer(wx.HORIZONTAL)
@@ -489,31 +529,50 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         lls.Add(wx.StaticText(self.panel,-1,_("Heater:"),pos=(0,343)),pos=(3,0),span=(1,1),flag=wx.ALIGN_CENTER)
         htemp_choices=[self.temps[i]+" ("+i+")" for i in sorted(self.temps.keys(),key=lambda x:self.temps[x])]
         
+        self.settoff=wx.Button(self.panel,-1,_("Off"),size=(36,-1),pos=(45,335))
+        self.settoff.Bind(wx.EVT_BUTTON,lambda e:self.do_settemp("off"))
+        self.printerControls.append(self.settoff)
+        lls.Add(self.settoff,pos=(3,1),span=(1,1))
+        
         if self.settings.last_temperature not in map(float,self.temps.values()):
             htemp_choices = [str(self.settings.last_temperature)] + htemp_choices
         self.htemp=wx.ComboBox(self.panel, -1,
-                choices=htemp_choices,style=wx.CB_DROPDOWN, size=(90,25),pos=(45,337))
+                choices=htemp_choices,style=wx.CB_DROPDOWN, size=(80,25),pos=(45,337))
+        self.htemp.Bind(wx.EVT_COMBOBOX,self.htemp_change)
 
-        
-        lls.Add(self.htemp,pos=(3,1),span=(1,3))
-        self.settbtn=wx.Button(self.panel,-1,_("Set"),size=(38,-1),pos=(135,335))
+        lls.Add(self.htemp,pos=(3,2),span=(1,2))
+        self.settbtn=wx.Button(self.panel,-1,_("Set"),size=(36,-1),pos=(125,335))
         self.settbtn.Bind(wx.EVT_BUTTON,self.do_settemp)
         self.printerControls.append(self.settbtn)
         lls.Add(self.settbtn,pos=(3,4),span=(1,1))
+        
         lls.Add(wx.StaticText(self.panel,-1,_("Bed:"),pos=(0,343)),pos=(4,0),span=(1,1),flag=wx.ALIGN_CENTER)
         btemp_choices=[self.bedtemps[i]+" ("+i+")" for i in sorted(self.bedtemps.keys(),key=lambda x:self.temps[x])]
+        
+        self.setboff=wx.Button(self.panel,-1,_("Off"),size=(36,-1),pos=(135,335))
+        self.setboff.Bind(wx.EVT_BUTTON,lambda e:self.do_bedtemp("off"))
+        self.printerControls.append(self.setboff)
+        lls.Add(self.setboff,pos=(4,1),span=(1,1))
+        
         if self.settings.last_bed_temperature not in map(float,self.bedtemps.values()):
             btemp_choices = [str(self.settings.last_bed_temperature)] + btemp_choices
         self.btemp=wx.ComboBox(self.panel, -1,
-                choices=btemp_choices,style=wx.CB_DROPDOWN, size=(90,25),pos=(45,367))
+                choices=btemp_choices,style=wx.CB_DROPDOWN, size=(80,25),pos=(135,367))
+        self.btemp.Bind(wx.EVT_COMBOBOX,self.btemp_change)
+        lls.Add(self.btemp,pos=(4,2),span=(1,2))
+        
+        self.setbbtn=wx.Button(self.panel,-1,_("Set"),size=(38,-1),pos=(135,365))
+        self.setbbtn.Bind(wx.EVT_BUTTON,self.do_bedtemp)
+        self.printerControls.append(self.setbbtn)
+        lls.Add(self.setbbtn,pos=(4,4),span=(1,2))
+        
         self.btemp.SetValue(str(self.settings.last_bed_temperature))
         self.htemp.SetValue(str(self.settings.last_temperature))
-         
-        
+
         ## added for an error where only the bed would get (pla) or (abs). 
         #This ensures, if last temp is a default pla or abs, it will be marked so.
         # if it is not, then a (user) remark is added. This denotes a manual entry
-
+        
         for i in btemp_choices:
             if i.split()[0] == str(self.settings.last_bed_temperature).split('.')[0] or i.split()[0] == str(self.settings.last_bed_temperature):
                 self.btemp.SetValue(i)
@@ -526,12 +585,8 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         if( '(' not in self.htemp.Value):
             self.htemp.SetValue(self.htemp.Value + ' (user)')   
 
-
-        lls.Add(self.btemp,pos=(4,1),span=(1,3))
-        self.setbbtn=wx.Button(self.panel,-1,_("Set"),size=(38,-1),pos=(135,365))
-        self.setbbtn.Bind(wx.EVT_BUTTON,self.do_bedtemp)
-        self.printerControls.append(self.setbbtn)
-        lls.Add(self.setbbtn,pos=(4,4),span=(1,2))
+        #lls.Add(self.btemp,pos=(4,1),span=(1,3))
+        #lls.Add(self.setbbtn,pos=(4,4),span=(1,2))
         self.tempdisp=wx.StaticText(self.panel,-1,"")
         lls.Add(self.tempdisp,pos=(4,6),span=(1,3))
         
@@ -593,6 +648,16 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         #uts.Layout()
         self.cbuttons_reload()
         
+    def htemp_change(self,event):
+        if self.hsetpoint > 0:
+            self.do_settemp("")
+        wx.CallAfter(self.htemp.SetInsertionPoint,0)
+
+    def btemp_change(self,event):
+        if self.bsetpoint > 0:
+            self.do_bedtemp("")
+        wx.CallAfter(self.btemp.SetInsertionPoint,0)
+    
     def showwin(self,event):
         if(self.f is not None):
             self.gwindow.Show()
@@ -642,28 +707,39 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
             #sizer.Remove(button)
             button.Destroy()
         self.custombuttonbuttons=[]
+        newbuttonbuttonindex = len(self.custombuttons)
+        while newbuttonbuttonindex>0 and self.custombuttons[newbuttonbuttonindex-1] is None:
+            newbuttonbuttonindex -= 1
         while len(self.custombuttons) < 13:
             self.custombuttons.append(None)
         for i in xrange(len(self.custombuttons)):
             btndef = self.custombuttons[i]
             try:
                 b=wx.Button(self.panel,-1,btndef[0])
+                b.SetToolTip(wx.ToolTip(_("Execute command: ")+btndef[1]))
                 if len(btndef)>2:
                     b.SetBackgroundColour(btndef[2])
                     rr,gg,bb=b.GetBackgroundColour().Get()
                     if 0.3*rr+0.59*gg+0.11*bb < 60:
                         b.SetForegroundColour("#ffffff")
             except:
-                b=wx.StaticText(self.panel,-1,"",size=(72,20),style=wx.ALIGN_CENTRE+wx.ST_NO_AUTORESIZE) #+wx.SIMPLE_BORDER
-                #b.Freeze()
-                b.Disable()
+                if i == newbuttonbuttonindex:
+                    self.newbuttonbutton=b=wx.Button(self.panel,-1,"+",size=(19,18))
+                    #b.SetFont(wx.Font(12,wx.FONTFAMILY_SWISS,wx.FONTSTYLE_NORMAL,wx.FONTWEIGHT_BOLD))
+                    b.SetForegroundColour("#4444ff")
+                    b.SetToolTip(wx.ToolTip(_("click to add new custom button")))
+                    b.Bind(wx.EVT_BUTTON,self.cbutton_edit)
+                else:
+                    b=wx.StaticText(self.panel,-1,"",size=(72,22),style=wx.ALIGN_CENTRE+wx.ST_NO_AUTORESIZE) #+wx.SIMPLE_BORDER
+                    #b.Freeze()
+                    b.Disable()
             b.custombutton=i
             b.properties=btndef
             if btndef is not None:
                 b.Bind(wx.EVT_BUTTON,self.procbutton)
                 b.Bind(wx.EVT_MOUSE_EVENTS,self.editbutton)
-            else:
-                b.Bind(wx.EVT_BUTTON,lambda e:e.Skip())
+            #else:
+            #    b.Bind(wx.EVT_BUTTON,lambda e:e.Skip())
             self.custombuttonbuttons.append(b)
             if i<4:
                 ubs.Add(b)
@@ -761,7 +837,7 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         self.cbutton_save(n,None)
         #while len(self.custombuttons) and self.custombuttons[-1] is None:
         #    del self.custombuttons[-1]
-        self.cbuttons_reload()
+        wx.CallAfter(self.cbuttons_reload)
     
     def cbutton_order(self,e,button,dir):
         n = button.custombutton
@@ -815,7 +891,14 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
                     return
             if not hasattr(self,"dragging"):
                 # init dragging of the custom button
-                if hasattr(obj,"custombutton"):
+                if hasattr(obj,"custombutton") and obj.properties is not None:
+                    self.newbuttonbutton.SetLabel("")
+                    self.newbuttonbutton.SetFont(wx.Font(10,wx.FONTFAMILY_DEFAULT,wx.FONTSTYLE_NORMAL,wx.FONTWEIGHT_NORMAL))
+                    self.newbuttonbutton.SetForegroundColour("black")
+                    self.newbuttonbutton.SetSize(obj.GetSize())
+                    if self.upperbottomsizer.GetItem(self.newbuttonbutton) is not None:
+                        self.upperbottomsizer.SetItemMinSize(self.newbuttonbutton,obj.GetSize())
+                        self.topsizer.Layout()
                     self.dragging = wx.Button(self.panel,-1,obj.GetLabel())
                     self.dragging.SetBackgroundColour(obj.GetBackgroundColour())
                     self.dragging.SetForegroundColour(obj.GetForegroundColour())
@@ -998,6 +1081,10 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
                     pass
                 string+=(self.tempreport.replace("\r","").replace("T",_("Hotend")).replace("B",_("Bed")).replace("\n","").replace("ok ",""))+" "
                 wx.CallAfter(self.tempdisp.SetLabel,self.tempreport.strip().replace("ok ",""))
+                #try:
+                #    self.tgauge.SetValue(int(filter(lambda x:x.startswith("T:"),self.tempreport.split())[0].split(":")[1]))
+                #except:
+                #    pass
                 if self.sdprinting:
                     string+= _(" SD printing:%04.2f %%") % (self.percentdone,)
                 if self.p.printing:
@@ -1035,6 +1122,10 @@ class PronterWindow(wx.Frame,pronsole.pronsole):
         if "T:" in l:
             self.tempreport=l
             wx.CallAfter(self.tempdisp.SetLabel,self.tempreport.strip().replace("ok ",""))
+            #try:
+            #    self.tgauge.SetValue(int(filter(lambda x:x.startswith("T:"),self.tempreport.split())[0].split(":")[1]))
+            #except:
+            #    pass
         tstring=l.rstrip()
         #print tstring
         if(tstring!="ok"):
@@ -1497,6 +1588,89 @@ class ButtonEdit(wx.Dialog):
         if self.name.GetValue()=="":
             self.name.SetValue(macro)
     
+class TempGauge(wx.Panel):
+    def __init__(self,parent,size=(200,22)):
+        wx.Panel.__init__(self,parent,-1,size=size)
+        self.Bind(wx.EVT_PAINT,self.paint)
+        self.SetBackgroundStyle(wx.BG_STYLE_CUSTOM)
+        self.width,self.height=size
+        self.value=0
+        self.setpoint=0
+        self.recalc()
+    def recalc(self):
+        self.max=max(int(self.setpoint*1.05),240)
+        self.scale=float(self.width-2)/float(self.max)
+        self.ypt=int(self.scale*max(self.setpoint,40))
+    def SetValue(self,value):
+        self.value=value
+        wx.CallAfter(self.Refresh)
+    def SetTarget(self,value):
+        self.setpoint=value
+        self.recalc()
+        wx.CallAfter(self.Refresh)
+    def paint(self,ev):
+        x0,y0,x1,y1,xE,yE = 1,1,self.ypt+1,1,self.width+1-2,20
+        dc=wx.PaintDC(self)
+        dc.SetBackground(wx.Brush((255,255,255)))
+        dc.Clear()
+        cold,medium,hot = wx.Colour(0,167,223),wx.Colour(239,233,119),wx.Colour(210,50.100)
+        gauge1,gauge2 = wx.Colour(255,255,210),wx.Colour(234,82,0)
+        shadow1,shadow2 = wx.Colour(110,110,110),wx.Colour(255,255,255)
+        gc = wx.GraphicsContext.Create(dc)
+        # draw shadow first
+        # corners
+        gc.SetBrush(gc.CreateRadialGradientBrush(xE-7,9,xE-7,9,8,shadow1,shadow2))
+        gc.DrawRectangle(xE-7,1,8,8)
+        gc.SetBrush(gc.CreateRadialGradientBrush(xE-7,17,xE-7,17,8,shadow1,shadow2))
+        gc.DrawRectangle(xE-7,17,8,8)
+        gc.SetBrush(gc.CreateRadialGradientBrush(x0+6,17,x0+6,17,8,shadow1,shadow2))
+        gc.DrawRectangle(0,17,x0+6,8)
+        # edges
+        gc.SetBrush(gc.CreateLinearGradientBrush(xE-13,0,xE-6,0,shadow1,shadow2))
+        gc.DrawRectangle(xE-6,9,10,8)
+        gc.SetBrush(gc.CreateLinearGradientBrush(x0,yE-2,x0,yE+5,shadow1,shadow2))
+        gc.DrawRectangle(x0+6,yE-2,xE-12,7)
+        # draw gauge background
+        gc.SetBrush(gc.CreateLinearGradientBrush(x0,y0,x1+1,y1,cold,medium))
+        gc.DrawRoundedRectangle(x0,y0,x1+4,yE,6)
+        gc.SetBrush(gc.CreateLinearGradientBrush(x1-2,y1,xE,y1,medium,hot))
+        gc.DrawRoundedRectangle(x1-2,y1,xE-x1,yE,6)
+        # draw gauge
+        gc.SetBrush(gc.CreateLinearGradientBrush(x0,y0+3,x0,y0+15,gauge1,gauge2))
+        #gc.SetBrush(gc.CreateLinearGradientBrush(0,3,0,15,wx.Colour(255,255,255),wx.Colour(255,90,32)))
+        width=12
+        w1=y0+9-width/2
+        w2=w1+width
+        value=x0+max(10,min(self.width+1-2,int(self.value*self.scale)))
+        val_path = gc.CreatePath()
+        val_path.MoveToPoint(x0,w1)
+        val_path.AddLineToPoint(value,w1)
+        val_path.AddLineToPoint(value+2,w1+width/4)
+        val_path.AddLineToPoint(value+2,w2-width/4)
+        val_path.AddLineToPoint(value,w2)
+        #val_path.AddLineToPoint(value-4,10)
+        val_path.AddLineToPoint(x0,w2)
+        gc.DrawPath(val_path)
+        # draw setpoint markers
+        setpoint=x0+max(10,int(self.setpoint*self.scale))
+        gc.SetBrush(gc.CreateBrush(wx.Brush(wx.Colour(0,0,0))))
+        setp_path = gc.CreatePath()
+        setp_path.MoveToPoint(setpoint-4,y0)
+        setp_path.AddLineToPoint(setpoint+4,y0)
+        setp_path.AddLineToPoint(setpoint,y0+5)
+        setp_path.MoveToPoint(setpoint-4,yE)
+        setp_path.AddLineToPoint(setpoint+4,yE)
+        setp_path.AddLineToPoint(setpoint,yE-5)
+        gc.DrawPath(setp_path)
+        # draw readout
+        text=u"T\u00B0 %u/%u"%(self.value,self.setpoint)
+        #gc.SetFont(gc.CreateFont(wx.Font(12,wx.FONTFAMILY_DEFAULT,wx.FONTSTYLE_NORMAL,wx.FONTWEIGHT_BOLD),wx.WHITE))
+        #gc.DrawText(text,29,-2)
+        gc.SetFont(gc.CreateFont(wx.Font(10,wx.FONTFAMILY_DEFAULT,wx.FONTSTYLE_NORMAL,wx.FONTWEIGHT_BOLD),wx.WHITE))
+        gc.DrawText(text,x0+31,y0+1)
+        gc.SetFont(gc.CreateFont(wx.Font(10,wx.FONTFAMILY_DEFAULT,wx.FONTSTYLE_NORMAL,wx.FONTWEIGHT_BOLD)))
+        gc.DrawText(text,x0+30,y0+0)
+    
 if __name__ == '__main__':
     app = wx.App(False)
     main = PronterWindow()