diff --git a/Cura/gui/projectPlanner.py b/Cura/gui/projectPlanner.py
index 0e040d5..951037b 100644
--- a/Cura/gui/projectPlanner.py
+++ b/Cura/gui/projectPlanner.py
@@ -604,6 +604,7 @@ class projectPlanner(wx.Frame):
 				action.sliceCmd = sliceRun.getSliceCommand(item.filename)
 				action.centerX = item.centerX
 				action.centerY = item.centerY
+				action.temperature = profile.getProfileSettingFloat('print_temperature')
 				action.extruder = item.extruder
 				action.filename = item.filename
 				clearZ = max(clearZ, item.getMaximum().z * item.scale + 5.0)
@@ -634,6 +635,7 @@ class projectPlanner(wx.Frame):
 			action.sliceCmd = sliceRun.getSliceCommand(resultFilename + "_temp_.stl")
 			action.centerX = profile.getProfileSettingFloat('machine_center_x')
 			action.centerY = profile.getProfileSettingFloat('machine_center_y')
+			action.temperature = profile.getProfileSettingFloat('print_temperature')
 			action.extruder = 0
 			action.filename = resultFilename + "_temp_.stl"
 			action.clearZ = 0
@@ -961,15 +963,20 @@ class ProjectSliceProgressWindow(wx.Frame):
 			put('machine_center_y', action.centerY - self.extruderOffset[action.extruder].y)
 			put('clear_z', action.clearZ)
 			put('extruder', action.extruder)
+			put('print_temperature', action.temperature)
 			
 			if action == self.actionList[0]:
 				resultFile.write(';TYPE:CUSTOM\n')
 				resultFile.write('T%d\n' % (action.extruder))
 				currentExtruder = action.extruder
+				prevTemp = action.temperature
 				resultFile.write(profile.getAlterationFileContents('start.gcode'))
 			else:
 				#reset the extrusion length, and move to the next object center.
 				resultFile.write(';TYPE:CUSTOM\n')
+				if prevTemp != action.temperature:
+					resultFile.write('M104 S%d\n' % (int(action.temperature)))
+					prevTemp = action.temperature
 				resultFile.write(profile.getAlterationFileContents('nextobject.gcode'))
 			resultFile.write(';PRINTNR:%d\n' % self.actionList.index(action))
 			profile.resetTempOverride()
diff --git a/Cura/util/profile.py b/Cura/util/profile.py
index b93e2e7..3925bdf 100644
--- a/Cura/util/profile.py
+++ b/Cura/util/profile.py
@@ -23,7 +23,7 @@ profileDefaultSettings = {
 	'skirt_line_count': '1',
 	'skirt_gap': '3.0',
 	'print_speed': '50',
-	'print_temperature': '0',
+	'print_temperature': '230',
 	'support': 'None',
 	'filament_diameter': '2.89',
 	'filament_density': '1.00',
@@ -126,12 +126,17 @@ G90                         ;absolute positioning
 #######################################################################################
 	'nextobject.gcode': """;Move to next object on the platform. clear_z is the minimal z height we need to make sure we do not hit any objects.
 G92 E0
-G1 Z{clear_z} E-5 F{max_z_speed}
+
+G91                                    ;relative positioning
+G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+G1 Z+0.5 E-5 F{travel_speed}           ;move Z up a bit and retract filament even more
+G90                                    ;absolute positioning
+
+G1 Z{clear_z} F{max_z_speed}
 G92 E0
 G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
-G1 F200 E5.2
+G1 F200 E5
 G92 E0
-G1 Z0 F{max_z_speed}
 """,
 #######################################################################################
 	'switchExtruder.gcode': """;Switch between the current extruder and the next extruder, when printing with multiple extruders.