Add experimental dwindle, so we can check it out.
This commit is contained in:
parent
afb8141334
commit
d70ee47508
3 changed files with 14 additions and 5 deletions
|
@ -333,11 +333,11 @@ def getProfileInformation():
|
|||
'Minimum_Distance_for_Early_Shutdown_millimeters': DEFSET,
|
||||
'Slowdown_Startup_Steps_positive_integer': DEFSET,
|
||||
},'dwindle': {
|
||||
'Activate_Dwindle': "False",
|
||||
'End_Rate_Multiplier_ratio': DEFSET,
|
||||
'Pent_Up_Volume_cubic_millimeters': DEFSET,
|
||||
'Slowdown_Steps_positive_integer': DEFSET,
|
||||
'Slowdown_Volume_cubic_millimeters': DEFSET,
|
||||
'Activate_Dwindle': storedSetting('enable_dwindle'),
|
||||
'End_Rate_Multiplier_ratio': '0.5',
|
||||
'Pent_Up_Volume_cubic_millimeters': storedSetting('dwindle_pent_up_volume'),
|
||||
'Slowdown_Steps_positive_integer': '5',
|
||||
'Slowdown_Volume_cubic_millimeters': storedSetting('dwindle_slowdown_volume'),
|
||||
},'splodge': {
|
||||
'Activate_Splodge': "False",
|
||||
'Initial_Lift_over_Extra_Thickness_ratio': DEFSET,
|
||||
|
|
|
@ -66,6 +66,11 @@ class expertConfigWindow(configBase.configWindowBase):
|
|||
configBase.TitleRow(right, "Joris")
|
||||
c = configBase.SettingRow(right, "Joris the outer edge", 'joris', False, '[Joris] is a code name for smoothing out the Z move of the outer edge. This will create a steady Z increase over the whole print. It is intended to be used with a single walled wall thickness to make cups/vases.')
|
||||
|
||||
configBase.TitleRow(right, "Dwindle")
|
||||
c = configBase.SettingRow(right, "Enable dwindle", 'enable_dwindle', False, 'Dwindle is used to slow down near the end of a printed line, and reducing the amount of filament printed near the end. This to release the preasure on the printer head.')
|
||||
c = configBase.SettingRow(right, "Pent up volume (mm3)", 'dwindle_pent_up_volume', '0.4', 'Amount of plastic inside the nozzle under pressure. This normally comes out as ooze after printing.')
|
||||
c = configBase.SettingRow(right, "Slow down volume (mm3)", 'dwindle_slowdown_volume', '5.0', 'Amount of printing volume that is used to slow down to release the pressure.')
|
||||
|
||||
main.Fit()
|
||||
self.Fit()
|
||||
|
||||
|
|
|
@ -65,6 +65,10 @@ profileDefaultSettings = {
|
|||
'raft_interface_material_amount': '100',
|
||||
'bottom_thickness': '0.3',
|
||||
|
||||
'enable_dwindle': 'False',
|
||||
'dwindle_pent_up_volume': '0.4',
|
||||
'dwindle_slowdown_volume': '5.0',
|
||||
|
||||
'add_start_end_gcode': 'True',
|
||||
'gcode_extension': 'gcode',
|
||||
'alternative_center': '',
|
||||
|
|
Loading…
Reference in a new issue