Changed layer height warning to use nozzle size. Added max volume extrusion per second check for speed.
parent
51001d2381
commit
4c176dc728
|
@ -84,7 +84,7 @@ class mainWindow(configBase.configWindowBase):
|
||||||
configBase.TitleRow(left, "Accuracy")
|
configBase.TitleRow(left, "Accuracy")
|
||||||
c = configBase.SettingRow(left, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
|
c = configBase.SettingRow(left, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
|
||||||
validators.validFloat(c, 0.0)
|
validators.validFloat(c, 0.0)
|
||||||
validators.warningAbove(c, 0.31, "Thicker layers then 0.3mm usually give bad results and are not recommended.")
|
validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 80 / 100), "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended.")
|
||||||
c = configBase.SettingRow(left, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
|
c = configBase.SettingRow(left, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
|
||||||
validators.validFloat(c, 0.0)
|
validators.validFloat(c, 0.0)
|
||||||
validators.wallThicknessValidator(c)
|
validators.wallThicknessValidator(c)
|
||||||
|
@ -105,6 +105,7 @@ class mainWindow(configBase.configWindowBase):
|
||||||
c = configBase.SettingRow(right, "Print speed (mm/s)", 'print_speed', '50', 'Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this.')
|
c = configBase.SettingRow(right, "Print speed (mm/s)", 'print_speed', '50', 'Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this.')
|
||||||
validators.validFloat(c, 1.0)
|
validators.validFloat(c, 1.0)
|
||||||
validators.warningAbove(c, 150.0, "It is highly unlikely that your machine can achieve a printing speed above 150mm/s")
|
validators.warningAbove(c, 150.0, "It is highly unlikely that your machine can achieve a printing speed above 150mm/s")
|
||||||
|
validators.printSpeedValidator(c)
|
||||||
|
|
||||||
configBase.TitleRow(right, "Temperature")
|
configBase.TitleRow(right, "Temperature")
|
||||||
c = configBase.SettingRow(right, "Printing temperature", 'print_temperature', '0', 'Temperature used for printing. Set at 0 to pre-heat yourself')
|
c = configBase.SettingRow(right, "Printing temperature", 'print_temperature', '0', 'Temperature used for printing. Set at 0 to pre-heat yourself')
|
||||||
|
|
|
@ -343,12 +343,13 @@ class PreviewGLCanvas(glcanvas.GLCanvas):
|
||||||
for i in xrange(0, len(path['list'])-1):
|
for i in xrange(0, len(path['list'])-1):
|
||||||
v0 = path['list'][i]
|
v0 = path['list'][i]
|
||||||
v1 = path['list'][i+1]
|
v1 = path['list'][i+1]
|
||||||
|
|
||||||
|
# Calculate line width from ePerDistance (needs layer thickness and filament diameter)
|
||||||
dist = (v0 - v1).vsize()
|
dist = (v0 - v1).vsize()
|
||||||
if dist > 0 and layerThickness > 0:
|
if dist > 0 and layerThickness > 0:
|
||||||
extrusionMMperDist = (v1.e - v0.e) / (v0 - v1).vsize()
|
extrusionMMperDist = (v1.e - v0.e) / (v0 - v1).vsize()
|
||||||
lineWidth = extrusionMMperDist * filamentArea / layerThickness / 2
|
lineWidth = extrusionMMperDist * filamentArea / layerThickness / 2
|
||||||
|
|
||||||
#TODO: Calculate line width from ePerDistance (needs layer thickness, steps_per_E and filament diameter)
|
|
||||||
normal = (v0 - v1).cross(util3d.Vector3(0,0,1))
|
normal = (v0 - v1).cross(util3d.Vector3(0,0,1))
|
||||||
normal.normalize()
|
normal.normalize()
|
||||||
v2 = v0 + normal * lineWidth
|
v2 = v0 + normal * lineWidth
|
||||||
|
|
|
@ -1,6 +1,9 @@
|
||||||
from __future__ import absolute_import
|
from __future__ import absolute_import
|
||||||
import __init__
|
import __init__
|
||||||
|
|
||||||
|
import types
|
||||||
|
import math
|
||||||
|
|
||||||
from newui import profile
|
from newui import profile
|
||||||
|
|
||||||
SUCCESS = 0
|
SUCCESS = 0
|
||||||
|
@ -53,6 +56,10 @@ class warningAbove():
|
||||||
def validate(self):
|
def validate(self):
|
||||||
try:
|
try:
|
||||||
f = float(self.setting.GetValue())
|
f = float(self.setting.GetValue())
|
||||||
|
if isinstance(self.minValueForWarning, types.FunctionType):
|
||||||
|
if f >= self.minValueForWarning():
|
||||||
|
return WARNING, self.warningMessage % (self.minValueForWarning())
|
||||||
|
else:
|
||||||
if f >= self.minValueForWarning:
|
if f >= self.minValueForWarning:
|
||||||
return WARNING, self.warningMessage
|
return WARNING, self.warningMessage
|
||||||
return SUCCESS, ''
|
return SUCCESS, ''
|
||||||
|
@ -86,3 +93,27 @@ class wallThicknessValidator():
|
||||||
#We already have an error by the int/float validator in this case.
|
#We already have an error by the int/float validator in this case.
|
||||||
return SUCCESS, ''
|
return SUCCESS, ''
|
||||||
|
|
||||||
|
class printSpeedValidator():
|
||||||
|
def __init__(self, setting):
|
||||||
|
self.setting = setting
|
||||||
|
self.setting.validators.append(self)
|
||||||
|
|
||||||
|
def validate(self):
|
||||||
|
try:
|
||||||
|
nozzleSize = float(profile.getProfileSetting('nozzle_size'))
|
||||||
|
layerHeight = float(profile.getProfileSetting('layer_height'))
|
||||||
|
printSpeed = float(profile.getProfileSetting('print_speed'))
|
||||||
|
|
||||||
|
printVolumePerMM = layerHeight * nozzleSize
|
||||||
|
printVolumePerSecond = printVolumePerMM * printSpeed
|
||||||
|
#Using 10mm3 per second with a 0.4mm nozzle (normal max according to Joergen Geerds)
|
||||||
|
maxPrintVolumePerSecond = 10 / (math.pi*(0.2*0.2)) * (math.pi*(nozzleSize/2*nozzleSize/2))
|
||||||
|
|
||||||
|
if printVolumePerSecond > maxPrintVolumePerSecond:
|
||||||
|
return WARNING, 'You are trying to print more then %.1fmm^3 of filament per second. This might cause filament slipping.' % (maxPrintVolumePerSecond)
|
||||||
|
|
||||||
|
return SUCCESS, ''
|
||||||
|
except ValueError:
|
||||||
|
#We already have an error by the int/float validator in this case.
|
||||||
|
return SUCCESS, ''
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue