backport of r46737
Add CONFIG_IEEE80211W variable to DRIVER_MAKEOPTS so that 802.11w
support is properly compiled in full variant.
This fixes#20179
Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46751 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of r46749
Without this patch adding the wifi device to the bridge may fail
because the bridge is not already configured when the wifi device gets
configured. This patch makes broadcom-wl wait till the bridge is ready.
This fixes#17262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46750 3c298f89-4303-0410-b956-a3cf2f4a3e73
This also adds one patchset of pending changes that fix support for
multiple interfaces. It was somehow broken.
Driver couldn't correctly match firmware and system interfaces resulting
in not working APs and WARNINGs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46736 3c298f89-4303-0410-b956-a3cf2f4a3e73
This prepares some place for backporting extra patches.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46735 3c298f89-4303-0410-b956-a3cf2f4a3e73
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.
Since fixing this is non trivial on a first glance, disable them for
big endian targets.
Backport of r46708.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46710 3c298f89-4303-0410-b956-a3cf2f4a3e73
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46691 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of r46688
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46689 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46612.
fix generating syscall-names.h
Sometimes the syscall number is not defined with a number but with an
offset to an other syscall and then make_syscall_h.sh created some
broken header file.
For example the bit/syscall.h from musl for i386 has this:
#define __NR_timer_create 259
#define __NR_timer_settime (__NR_timer_create+1)
With this patch the resulting array looks like this:
[259] = "timer_create",
[(__NR_timer_create+1)] = "timer_settime",
This closes#20195.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46679 3c298f89-4303-0410-b956-a3cf2f4a3e73
fixes 2 bugs
* typo
* use %04d rather than %d when printing the position
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46666
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46675 3c298f89-4303-0410-b956-a3cf2f4a3e73
It was missed in the r46471.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46582
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46583 3c298f89-4303-0410-b956-a3cf2f4a3e73
this is required by the new button timeout feature
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46471
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46581 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
In 15.05-rc2 we got support for "set-interval" and "clear-interval"
which got dropped with the update of procd done in r46257. This new
"button" action provides similar functionality so it makes sense to
backport it to 15.05.
Backport of r46578
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46579 3c298f89-4303-0410-b956-a3cf2f4a3e73
The name of the module was wrong before.
This should fix#20283.
backport of r46574.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46577 3c298f89-4303-0410-b956-a3cf2f4a3e73
found with strace, not sure we got all of them though
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46467
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46511 3c298f89-4303-0410-b956-a3cf2f4a3e73
We need a+x rights on the path to the root of the jails
so we can use users other than root (like nobody)
This partly fixes jailed dnsmasq
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46466
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46510 3c298f89-4303-0410-b956-a3cf2f4a3e73
Added option for old firmware version (10.1 API v2). It seems that recent
firmware versions are constantly crashing (at least on a QCA9880-BR4A-R) and
this provides the option to select an older version instead.
Backport of r46340
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46443 3c298f89-4303-0410-b956-a3cf2f4a3e73
We were not copying the additional files needed to get USB to work on
the AT91 platforms, make sure we do this.
Backport of r46172
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46417 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
This adds support for filtering messages
Backport of r46356
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46365 3c298f89-4303-0410-b956-a3cf2f4a3e73
This fixes the following security vulnerabilities in curl:
* CVE-2015-3143
* CVE-2015-3144
* CVE-2015-3145
* CVE-2015-3148
* CVE-2015-3153
* CVE-2015-3236
* CVE-2015-3237
This was fixed in trunk with update to version 7.43.0 in r46169.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46312 3c298f89-4303-0410-b956-a3cf2f4a3e73
See http://patchwork.ozlabs.org/patch/493573/ for more information
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46293 3c298f89-4303-0410-b956-a3cf2f4a3e73
During certificate verification, OpenSSL (starting from version 1.0.1n and
1.0.2b) will attempt to find an alternative certificate chain if the first
attempt to build such a chain fails. An error in the implementation of this
logic can mean that an attacker could cause certain checks on untrusted
certificates to be bypassed, such as the CA flag, enabling them to use a valid
leaf certificate to act as a CA and "issue" an invalid certificate.
This issue will impact any application that verifies certificates including
SSL/TLS/DTLS clients and SSL/TLS/DTLS servers using client authentication.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46285
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46286 3c298f89-4303-0410-b956-a3cf2f4a3e73
Now we support NVRAM whatever its size is.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46262
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46263 3c298f89-4303-0410-b956-a3cf2f4a3e73
Use actual partition size and content offset to calculate it.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46260
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46261 3c298f89-4303-0410-b956-a3cf2f4a3e73
This reverts commit r45579.
With the latest change r46251 ("nvram: fix "Segmentation fault" caused
by setting memory out of buffer") nvram utility shouldn't crash anymore.
It was tested on 3 brcm47xx devices:
1) Unknown with 0x10000 NVRAM size (0x8000 offset)
2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset)
3) Linksys WRT300N V1 with 0x10000 (0x8000 offset)
And 3 bcm53xx devices:
1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size
2) Buffalo WZR-1750DHP with 0x10000 NVRAM size
3) Netgear R6250 V1 with 0x180000 NVRAM size
(all using 0 offset)
This is an important change as it allows reading whole NVRAM. This may
critical when reading some basic configuration (e.g. switch ports).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46253
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46259 3c298f89-4303-0410-b956-a3cf2f4a3e73
Some MTD partitions with NVRAM have content starting in the middle. In
such case offset is set and nvram_header returns pointer to the middle.
It means we have to respect offset when calculating remaining space.
By the way use real MTD partition size (nvram_part_size variable) as we
may want to bump NVRAM_SPACE in the (very near) future.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46251
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46258 3c298f89-4303-0410-b956-a3cf2f4a3e73
sd_mod depends on scsi_mod, but due to it being an AutoLoad and not
AutoProbe module, it was not loading when installing the package,
causing unknown symbol errors for sd_mod and anything depending on it.
Closes#14927, #18293, #19351.
Backport of r46176.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46177 3c298f89-4303-0410-b956-a3cf2f4a3e73
The g++-uc wrapper hardcodes $(STAGING_DIR) and $(TOOLCHAIN_DIR) paths which
will not work outside of the original build environment.
Replace the hardcoded staging_dir occurences with paths relative to the
$STAGING_DIR environment variable to make the g++-uc* wrappers usable in an
SDK environment.
Fixes the libdb47 build failure reported at
https://lists.openwrt.org/pipermail/openwrt-devel/2015-April/032455.html
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46162
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46163 3c298f89-4303-0410-b956-a3cf2f4a3e73
A long time ago, ath9k had issues during reset where the DMA engine
would stay active and could potentially corrupt memory.
To debug those issues, the driver would print warnings whenever they
occur.
Nowadays, these issues are gone and the primary cause of these messages
is if the MAC is stuck during reset or busy processing a long
transmission. This is fairly harmless, yet these messages continue to
worry users.
To reduce the number of bogus bug reports, turn these messages into
debug messages and count their occurence in the "reset" debugfs file.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46158
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46159 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46156
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46157 3c298f89-4303-0410-b956-a3cf2f4a3e73
There are two important patches in this patchset: updating read pointer
quicker & rework of .get_station().
There are few more upstream patches that are p2p-related and weren't
backported in this commit.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46084
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46100 3c298f89-4303-0410-b956-a3cf2f4a3e73
Andrzej Surowiec